Регистрация

Индикаторы и стратегии

Momentum Shift [Bigbeluga] This indicator identifies momentum shifts using a smoothed momentum calculation. It plots dynamic shift zones consisting of five levels that expand or contract based on price action. When momentum rises, the indicator creates an upward shift zone, and when momentum falls, it generates a downward shift zone. The shift zones dynamically react to price, stopping extension when a level is crossed. 🔵Key Features: Smoothed Momentum Calculation: ➣ Utilizes a Hull Moving Average (HMA) to smooth momentum and reduce noise. ➣ Identifies momentum shifts with crossovers between the current momentum value and its previous state. ➣ Uses a gradient color scheme to highlight momentum strength. Dynamic Shift Zones: ➣ When momentum rises, the indicator plots an upper shift zone with five incremental levels. ➣ When momentum falls, a lower shift zone is formed with five descending levels. ➣ Each level within the shift zone represents a progressively stronger momentum shift. Level Extension Control: ➣ Shift zones stop extending once a level is crossed by price. ➣ Levels closer to price act as key momentum resistance or support zones. ➣ If price retraces after a shift, the remaining levels stay intact for further reference. Momentum Direction Indications: ➣ Labels (▲ and ▼) appear at momentum shift points to indicate rising or falling momentum. 🔵Usage: Momentum-Based Entries: Identify momentum shifts early by using shift zones as confirmation for trade entries. Trend Continuation & Exhaustion: Observe which shift levels price respects—if momentum shift zones hold, the trend may continue; if they break, momentum may reverse. Dynamic Support & Resistance: Use the five-level shift zones as temporary support and resistance areas that adapt to momentum shifts. Momentum Strength Analysis: If price moves through multiple shift levels in one direction, it signals strong momentum in that direction. Momentum Shift is a powerful tool for traders looking to analyze momentum shifts with structured visual zones. By combining smoothed momentum calculations with dynamic shift zones, this indicator provides a clear view of market momentum and helps traders navigate price action effectively.
Индикатор Pine Script®
от BigBeluga
7
BTC SCALPERS By Anup## *BTC Scalper by Anup – Precision Trading for BTC Scalpers* 🔹 *BTC Scalper by Anup* is a high-accuracy scalping indicator designed specifically for Bitcoin traders. This tool combines multiple confirmations to ensure precise entry and exit points, reducing false signals and improving profitability. ### *🚀 Key Features:* ✅ *EMA Crossover Strategy* – Uses EMA to identify trend reversals. ✅ *ATR Volatility Filter* – Ensures trades are executed only in high-volatility conditions. ✅ *RSI Confirmation* – Prevents overbought/oversold entries by confirming trend strength. ✅ *Stochastic Momentum Check* – Filters weak signals and confirms valid trade setups. ✅ *Buy & Sell Signals* – Clearly marked entries and exits for easy decision-making. ### *📈 How It Works:* 📌 *BUY Signal* – When the EMA crosses above , ATR confirms volatility, RSI is above 50, and Stochastic shows momentum. 📌 *SELL Signal* – When the EMA crosses below , ATR confirms volatility, RSI is below 50, and Stochastic indicates bearish momentum. 🚀 Perfect for *scalpers and day traders* looking for *fast & reliable trade signals* on BTC ONLY! 📍 *Timeframe Recommendation:* Best suited for *M5 to M15 charts* for short-term trades. 🔔 *Try BTC Scalper by Anup and take your BTC trading to the next level!*
Индикатор Pine Script®
от anup2
BTC SCALPERS By Anup## *BTC Scalper by Anup – Precision Trading for BTC Scalpers* 🔹 *BTC Scalper by Anup* is a high-accuracy scalping indicator designed specifically for Bitcoin traders. This tool combines multiple confirmations to ensure precise entry and exit points, reducing false signals and improving profitability. ### *🚀 Key Features:* ✅ *EMA Crossover Strategy* – Uses * TWO EMA* to identify trend reversals. ✅ *ATR Volatility Filter* – Ensures trades are executed only in high-volatility conditions. ✅ *RSI Confirmation* – Prevents overbought/oversold entries by confirming trend strength. ✅ *Stochastic Momentum Check* – Filters weak signals and confirms valid trade setups. ✅ *Buy & Sell Signals By arrow* – Clearly marked entries and exits for easy decision-making. ### *📈 How It Works:* 📌 *BUY Signal* – When the *EMA to EMA crosses up*, ATR confirms volatility, RSI is above 50, and Stochastic shows momentum. 📌 *SELL Signal* – When the *EMA to ema crosses down*, ATR confirms volatility, RSI is below 50, and Stochastic indicates bearish momentum. 🚀 Perfect for *scalpers and day traders* looking for *fast & reliable trade signals* on BTC only! 📍 *Timeframe Recommendation:* Best suited for *M5 to M15 charts* for short-term trades. 🔔 *Try BTC Scalper by Anup and take your BTC trading to the next level!*
Индикатор Pine Script®
от anup2
[TABLE] Moving Average Stage Indicator Table📈 MA Stage Indicator Table 🧠 Overview: This script analyzes market phases based on moving average (MA) crossovers, classifying them into 6 distinct stages and displaying statistical summaries for each. 🔍 Key Features: • Classifies market condition into Stage 1 to Stage 6 based on the relationship between MA1 (short), MA2 (mid), and MA3 (long) • Provides detailed stats for each stage: • Average Duration • Average Width (MA distance) • Slope (Angle) - High / Low / Average • Shows current stage details in real-time • Supports custom date range filtering • Choose MA type: SMA or EMA • Optional background coloring for stages • Clean summary table displayed on the chart
Индикатор Pine Script®
от dbals0
Adv EMA Cloud v6 (ADX, Alerts)Summary: This indicator provides a multi-faceted view of market trends using Exponential Moving Averages (EMAs) arranged in visually intuitive clouds, enhanced with an optional ADX-based range filter and configurable alerts for key market conditions. It aims to help traders quickly gauge trend alignment across short, medium, and long timeframes while filtering signals during potentially choppy market conditions. Key Features: Multiple EMAs: Displays 10-period (Fast), 20-period (Mid), and 50-period (Slow) EMAs. Long-Term Trend Filter: Includes a 200-period EMA to provide context for the overall dominant trend direction. Dual EMA Clouds: Fast/Mid Cloud (10/20 EMA): Fills the area between the 10 and 20 EMAs. Defaults to Green when 10 > 20 (bullish short-term momentum) and Red when 10 < 20 (bearish short-term momentum). Mid/Slow Cloud (20/50 EMA): Fills the area between the 20 and 50 EMAs. Defaults to Aqua when 20 > 50 (bullish mid-term trend) and Fuchsia when 20 < 50 (bearish mid-term trend). Optional ADX Range Filter: Uses the Average Directional Index (ADX) to identify potentially non-trending or choppy markets. When enabled and ADX falls below a user-defined threshold, the EMA clouds will turn grey, visually warning that trend-following signals may be less reliable. Configurable Alerts: Provides several built-in alert conditions using Pine Script's alertcondition function: Confluence Condition: Triggers when a 10/20 EMA crossover occurs while both EMA clouds show alignment (both bullish/green/aqua or both bearish/red/fuchsia) and price respects the 200 EMA filter and the ADX filter indicates a trend (if filters are enabled). MA Filter Cross: Triggers when price crosses above or below the 200 EMA filter line. Full Alignment Start: Triggers on the first bar where full bullish or bearish alignment occurs (both clouds aligned + MA filter respected + ADX trending, if filters are enabled). How It Works: EMA Calculation: Standard Exponential Moving Averages are calculated for the 10, 20, 50, and 200 periods based on the closing price. Cloud Creation: The fill() function visually shades the area between the 10 & 20 EMAs and the 20 & 50 EMAs. Cloud Coloring: The color of each cloud is determined by the relationship between the two EMAs that define it (e.g., if EMA 10 is above EMA 20, the first cloud is bullish-colored). ADX Filter Logic: The script calculates the ADX value. If the "Use ADX Trend Filter?" input is checked and the calculated ADX is below the specified "ADX Trend Threshold", the script considers the market potentially ranging. ADX Visual Effect: During detected ranging periods (if the ADX filter is active), the plotCloud12Color and plotCloud23Color variables are assigned a neutral grey color instead of their normal bullish/bearish colors before being passed to the fill() function. Alert Logic: Boolean variables track the specific conditions (crossovers, cloud alignment, filter positions, ADX state). The alertcondition() function creates triggerable alerts based on these pre-defined conditions. Potential Interpretation (Not Financial Advice): Trend Alignment: When both clouds share the same directional color (e.g., both bullish - Green & Aqua) and price is on the corresponding side of the 200 EMA filter, it may suggest a stronger, more aligned trend. Conversely, conflicting cloud colors may indicate indecision or transition. Dynamic Support/Resistance: The EMA lines themselves (especially the 20, 50, and 200) can sometimes act as dynamic levels where price might react. Range Warning: Greyed-out clouds (when ADX filter is enabled) serve as a visual warning that trend-based strategies might face increased difficulty or whipsaws. Confluence Alerts: The specific confluence alerts signal moments where multiple conditions align (crossover + cloud agreement + filters), which some traders might view as higher-probability setups. Customization: All EMA lengths (10, 20, 50, 200) are adjustable via the Inputs menu. The ADX length and threshold are configurable. The MA Trend Filter and ADX Trend Filter can be independently enabled or disabled. Disclaimer: This indicator is provided for informational and educational purposes only. Trading financial markets involves significant risk. Past performance is not indicative of future results. Always conduct your own thorough analysis and consider your risk tolerance before making any trading decisions. This indicator should be used in conjunction with other analysis methods and tools. Do not trade based solely on the signals or visuals provided by this indicator.
Индикатор Pine Script®
от epphllps
PunkAlgo Oscillator [1.0]//@version=5 indicator(title='PunkAlgo Oscillator ', shorttitle='Punk Oscillator') n1 = input(4, 'Channel Length') n2 = input(15, 'Average Length') obLevel1 = input(88, 'Over Bought Level 1') obLevel2 = input(81, 'Over Bought Level 2') osLevel1 = input(-83, 'Over Sold Level 1') osLevel2 = input(-76, 'Over Sold Level 2') ap = hlc3 esa = ta.ema(ap, n1) d = ta.ema(math.abs(ap - esa), n1) ci = (ap - esa) / (0.015 * d) tci = ta.ema(ci, n2) wt1 = tci wt2 = ta.sma(wt1, 4) var indbot=0 var indtop=0 if wt1 > wt2 and wt1 < wt2 indbot := bar_index if wt1 < wt2 and wt1 > wt2 indtop := bar_index bott = bar_index - indbot topp = bar_index - indtop // Histogram lookbackPeriod = input(35, "Lookback Period") // Calculate the percentage change in price for each bar priceChange = close - close priceChangePercentage = priceChange / close * 100 // Calculate the average volume over the lookback period averageVolume = ta.ema(volume, lookbackPeriod) // Initialize the counters for upward and downward trends upwardTrends = 0 downwardTrends = 0 // Iterate over the lookback period and count the number of upward and downward trends for i = 1 to lookbackPeriod if priceChangePercentage > 0 upwardTrends := upwardTrends + 1 else if priceChangePercentage < 0 downwardTrends := downwardTrends + 1 // Calculate the probabilities of upward, downward, and neutral trends totalTrends = upwardTrends + downwardTrends probabilityUpward = math.round(upwardTrends / totalTrends, 2) * 100 probabilityDownward = math.round(downwardTrends / totalTrends, 2) * 100 // Determine the probability trend based on the probabilities probabilityTrend = "" if probabilityUpward > probabilityDownward probabilityTrend := "Upward" else if probabilityUpward < probabilityDownward probabilityTrend := "Downward" // Calculate the oscillator value based on the difference between upward and downward trends oscillatorValue = probabilityUpward - probabilityDownward // Determine the histogram color based on the difference between the oscillator value and zero line histogramColor = oscillatorValue >= 0 ? (oscillatorValue < oscillatorValue ? color.new(#089981, 50) : color.new(#089981, 50)) : (oscillatorValue < oscillatorValue ? color.new(#f23645, 50) : color.new(#f23645, 50)) // Smoothning the Histogram smooth_hist = input.bool(true, "Smoothen Histogram", inline="smooth_hist") smoothning_scale = input.int(defval=3, title="", minval=1, maxval=10, step=1, inline="smooth_hist") smooth_len = smoothning_scale * 2 smooth_hist_val = smooth_hist ? ta.ema(oscillatorValue, smooth_len) : oscillatorValue // Plot the histogram plot(smooth_hist_val, color=histogramColor, style=plot.style_area, linewidth=1, title="Probability Histogram") // Histogram plot(0, color=color.new(#787b86, 100)) top1 = plot(obLevel1, color=color.new(#4caf4f, 100)) top2 = plot(osLevel1, color=color.new(#ff5252, 100)) bottom1 = plot(obLevel2, color=color.new(#4caf4f, 100)) bottom2 = plot(osLevel2, color=color.new(#ff5252, 100)) fill(plot1=top1, plot2=bottom1, color=wt2 > 0 and (wt1 - wt2) > 0 ? #089981 : wt2 > 0 or (wt1 - wt2) > 0 ?color.new(#363a45, 60) : color.new(#363a45, 70)) fill(plot1=top2, plot2=bottom2, color=wt2 < 0 and (wt1 - wt2) < 0 ? #f23645 : wt2 < 0 or (wt1 - wt2) < 0 ? color.new(#363a45, 60) : color.new(#363a45, 70)) plot1 = plot(wt1, color=wt1 > wt2 ? color.new(color.green, 0) : color.gray ,title="Signal") plot2 = plot(wt2, color=color.new(#ff5252, 100),title="Signal Dots") fill(plot1=plot1, plot2=plot2, color=wt1 > wt2 ? color.rgb(8, 153, 129, 80) : color.rgb(120, 123, 134, 80),title="Signal Shadow") plot(ta.cross(wt1, wt2) ? wt2 : na, color=color.new(color.black, 0), style=plot.style_circles, linewidth=3,title="Dot Shadows") plot(ta.cross(wt1, wt2) ? wt2 : na, color=wt2 - wt1 > 0 ? color.gray : color.green , style=plot.style_circles, linewidth=2) // Divergences Module tsi1 = wt1 tsi2 = ta.sma(wt2, 4) long = n1 short = n2 signal22 = n2 price = hlc3 src2 = hlc3 src = hlc3 input_src = tsi1 // Divergences Options up = ta.rma(math.max(ta.change(src), 0), short) down = ta.rma(-math.min(ta.change(src), 0), short) lbR = input(title='Divergence Pivot Lookback Right', defval=1) lbL = input(title='Divergence Pivot Lookback Left', defval=5) rangeUpper = input(title='Max of Lookback Range', defval=100) rangeLower = input(title='Min of Lookback Range', defval=2) plotBull = input(title='Plot Bullish', defval=true) plotHiddenBull = input(title='Plot Hidden Bullish', defval=false) plotBear = input(title='Plot Bearish', defval=true) plotHiddenBear = input(title='Plot Hidden Bearish', defval=false) bearColor = color.new(#f23645, 10) bullColor = color.new(#2157f3, 10) hiddenBullColor = color.new(color.aqua, 0) hiddenBearColor = color.new(color.orange, 0) textColor = color.new(color.white, 0) noneColor = color.new(color.white, 100) osc = tsi1 plFound = na(ta.pivotlow(osc, lbL, lbR)) ? false : true phFound = na(ta.pivothigh(osc, lbL, lbR)) ? false : true _inRange(cond) => bars = ta.barssince(cond == true) rangeLower <= bars and bars <= rangeUpper //------------------------------------------------------------------------------ // Regular Bullish // Osc: Higher Low oscHL = osc > ta.valuewhen(plFound, osc , 1) and _inRange(plFound ) // Price: Lower Low priceLL = low < ta.valuewhen(plFound, low , 1) bullCond = plotBull and priceLL and oscHL and plFound plot(plFound ? osc : na, offset=-lbR, title='Regular Bullish', linewidth=1, color=bullCond ? bullColor : noneColor, transp=0) //------------------------------------------------------------------------------ // Hidden Bullish // Osc: Lower Low oscLL = osc < ta.valuewhen(plFound, osc , 1) and _inRange(plFound ) // Price: Higher Low priceHL = low > ta.valuewhen(plFound, low , 1) hiddenBullCond = plotHiddenBull and priceHL and oscLL and plFound plot(plFound ? osc : na, offset=-lbR, title='Hidden Bullish', linewidth=1, color=hiddenBullCond ? hiddenBullColor : noneColor, transp=0) //------------------------------------------------------------------------------ // Regular Bearish // Osc: Lower High oscLH = osc < ta.valuewhen(phFound, osc , 1) and _inRange(phFound ) // Price: Higher High priceHH = high > ta.valuewhen(phFound, high , 1) bearCond = plotBear and priceHH and oscLH and phFound plot(phFound ? osc : na, offset=-lbR, title='Regular Bearish', linewidth=1, color=bearCond ? bearColor : noneColor, transp=0) //------------------------------------------------------------------------------ // Hidden Bearish // Osc: Higher High oscHH = osc > ta.valuewhen(phFound, osc , 1) and _inRange(phFound ) // Price: Lower High priceLH = high < ta.valuewhen(phFound, high , 1) hiddenBearCond = plotHiddenBear and priceLH and oscHH and phFound plot(phFound ? osc : na, offset=-lbR, title='Hidden Bearish', linewidth=1, color=hiddenBearCond ? hiddenBearColor : noneColor, transp=0) // Signals Module string TT_HARSI = 'Period for the RSI calculations used to generate the' + 'candles. This seperate from the RSI plot/histogram length.' string TT_PBIAS = 'Smoothing feature for the OPEN of the HARSI candles.' + ' Increases bias toward the prior open value which can' + ' help provide better visualisation of trend strength.' + ' ** By changing the Open values, High and Low can also' + ' be distorted - however Close will remain unchanged.' string TT_SMRSI = 'This option smoothes the RSI in a manner similar to HA' + ' open, but uses the realtime rsi rather than the prior' + ' close value.' string TT_STOCH = 'Uses the RSI generated by the above settings, and as such' + ' will be affected by the smoothing option.' string TT_STFIT = 'Adjusts the vertical scaling of the stochastic, can help' + ' to prevent distortion of other data in the channel.' + ' Has no impact cross conditions.' //////////////////////////////////////////////////////////////////////////////// // // // ====== INPUTS ====== // // // //////////////////////////////////////////////////////////////////////////////// // -- Candle config string GROUP_CAND = 'Config » HARSI Candles' i_lenHARSI = input.int(10, 'Length', group=GROUP_CAND, minval=1, tooltip=TT_HARSI) i_smoothing = input.int(5, 'Open Smoothing', group=GROUP_CAND, minval=1, maxval=100, tooltip=TT_PBIAS) string INLINE_COL = 'Colour Pallette' i_colUp = input.color(color.teal, 'Colour Pallette  ', group=GROUP_CAND, inline=INLINE_COL) i_colDown = input.color(color.red, ' ', group=GROUP_CAND, inline=INLINE_COL) i_colWick = input.color(color.gray, ' ', group=GROUP_CAND, inline=INLINE_COL) // -- RSI plot config string GROUP_PLOT = 'Config » RSI Plot' i_source = input.source(ohlc4, 'Source', group=GROUP_PLOT) i_lenRSI = input.int(7, 'Length', group=GROUP_PLOT, minval=1) i_mode = input.bool(true, 'Smoothed Mode RSI?', group=GROUP_PLOT, tooltip=TT_SMRSI) i_showPlot = input.bool(true, 'Show RSI Plot?', group=GROUP_PLOT) i_showHist = input.bool(true, 'Show RSI Histogram?', group=GROUP_PLOT) // -- Channel OB/OS config string GROUP_CHAN = 'Config » OB/OS Boundaries' i_upper = input.int(50, 'OB', group=GROUP_CHAN, inline='OB', minval=1, maxval=50) i_upperx = input.int(30, 'OB Extreme', group=GROUP_CHAN, inline='OB', minval=1, maxval=50) i_lower = input.int(-50, 'OS', group=GROUP_CHAN, inline='OS', minval=-50, maxval=-1) i_lowerx = input.int(-30, 'OS Extreme', group=GROUP_CHAN, inline='OS', minval=-50, maxval=-1) // Settins // WaveTrend wwttShow = input(false, title='Show WaveTrend') wwttBuyShow = input(true, title='Show Buy dots') wwttGoldShow = input(true, title='Show Gold dots') wwttSellShow = input(true, title='Show Sell dots') wwttDivShow = input(true, title='Show Div. dots') vwapShow = input(true, title='Show Fast wwtt') wwttChannelLen = input(9, title='wwtt Channel Length') wwttAverageLen = input(12, title='wwtt Average Length') wwttMASource = input(hlc3, title='wwtt MA Source') wwttMALen = input(3, title='wwtt MA Length') // WaveTrend Overbought & Oversold lines OOBBLevel = input(53, title='wwtt Overbought Level 1') OOBBLevel2 = input(60, title='wwtt Overbought Level 2') OOBBLevel3 = input(100, title='wwtt Overbought Level 3') oosLevel = input(-53, title='wwtt Oversold Level 1') oosLevel2 = input(-60, title='wwtt Oversold Level 2') oosLevel3 = input(-75, title='wwtt Oversold Level 3') // Divergence wwtt wwttShowDiv = input(true, title='Show wwtt Regular Divergences') wwttShowHiddenDiv = input(false, title='Show wwtt Hidden Divergences') showHiddenDiv_nl = input(true, title='Not apply OB/OS Limits on Hidden Divergences') wwttDivOOBBLevel = input(45, title='wwtt Bearish Divergence min') wwttDivoosLevel = input(-65, title='wwtt Bullish Divergence min') // Divergence extra range wwttDivOOBBLevel_addshow = input(true, title='Show 2nd wwtt Regular Divergences') wwttDivOOBBLevel_add = input(15, title='wwtt 2nd Bearish Divergence') wwttDivoosLevel_add = input(-40, title='wwtt 2nd Bullish Divergence 15 min') // RSI+MFI rsiMFIShow = input(true, title='Show MFI') rsiMFIperiod = input(60, title='MFI Period') rsiMFIMultiplier = input.float(150, title='MFI Area multiplier') rsiMFIPosY = input(2.5, title='MFI Area Y Pos') // RSI rsiShow = input(false, title='Show RSI') rsiSRC = input(close, title='RSI Source') rsiLen = input(14, title='RSI Length') rsiOversold = input.int(30, title='RSI Oversold', minval=29, maxval=100) rsiOverbought = input.int(60, title='RSI Overbought', minval=0, maxval=60) // Divergence RSI rsiShowDiv = input(false, title='Show RSI Regular Divergences') rsiShowHiddenDiv = input(false, title='Show RSI Hidden Divergences') rsiDivOOBBLevel = input(60, title='RSI Bearish Divergence min') rsiDivoosLevel = input(30, title='RSI Bullish Divergence min') // Colors colorRed = #ff0000 colorPurple = #e600e6 colorGreen = #3fff00 colorOrange = #e2a400 colorYellow = #ffe500 colorWhite = #ffffff colorPink = #ff00f0 colorBluelight = #31c0ff colorwwtt1 = #49536195 colorwwtt2 = #7b9fd596 colorwwtt2_ = #131722 colormacdwwtt1a = #4caf58 colormacdwwtt1b = #af4c4c colormacdwwtt1c = #7ee57e colormacdwwtt1d = #ff3535 colormacdwwtt2a = #305630 colormacdwwtt2b = #310101 colormacdwwtt2c = #132213 colormacdwwtt2d = #770000 //////////////////////////////////////////////////////////////////////////////// // // // ====== FUNCTIONS ====== // // // //////////////////////////////////////////////////////////////////////////////// // FUNCTIONS // zero median rsi helper function, just subtracts 50. f_zrsi(_source, _length) => ta.rsi(_source, _length) - 50 // zero median stoch helper function, subtracts 50 and includes % scaling f_zstoch(_source, _length, _smooth, _scale) => float _zstoch = ta.stoch(_source, _source, _source, _length) - 50 float _smoothed = ta.sma(_zstoch, _smooth) float _scaled = _smoothed / 100 * _scale _scaled // mode selectable rsi function for standard, or smoothed output f_rsi(_source, _length, _mode) => // get base rsi float _zrsi = f_zrsi(_source, _length) // smoothing in a manner similar to HA open, but rather using the realtime // rsi in place of the prior close value. var float _smoothed = na _smoothed := na(_smoothed ) ? _zrsi : (_smoothed + _zrsi) / 2 // return the requested mode _mode ? _smoothed : _zrsi // RSI Heikin-Ashi generation function f_rsiHeikinAshi(_length) => // get close rsi float _closeRSI = f_zrsi(close, _length) // emulate "open" simply by taking the previous close rsi value float _openRSI = nz(_closeRSI , _closeRSI) // the high and low are tricky, because unlike "high" and "low" by // themselves, the RSI results can overlap each other. So first we just go // ahead and get the raw results for high and low, and then.. float _highRSI_raw = f_zrsi(high, _length) float _lowRSI_raw = f_zrsi(low, _length) // ..make sure we use the highest for high, and lowest for low float _highRSI = math.max(_highRSI_raw, _lowRSI_raw) float _lowRSI = math.min(_highRSI_raw, _lowRSI_raw) // ha calculation for close float _close = (_openRSI + _highRSI + _lowRSI + _closeRSI) / 4 // ha calculation for open, standard, and smoothed/lagged var float _open = na _open := na(_open ) ? (_openRSI + _closeRSI) / 2 : (_open * i_smoothing + _close ) / (i_smoothing + 1) // ha high and low min-max selections float _high = math.max(_highRSI, math.max(_open, _close)) float _low = math.min(_lowRSI, math.min(_open, _close)) // return the OHLC values // Divergences f_top_fractal(src) => src < src and src < src and src > src and src > src f_bot_fractal(src) => src > src and src > src and src < src and src < src f_fractalize(src) => f_top_fractal(src) ? 1 : f_bot_fractal(src) ? -1 : 0 f_findDivs(src, topLimit, botLimit, useLimits) => fractalTop = f_fractalize(src) > 0 and (useLimits ? src >= topLimit : true) ? src : na fractalBot = f_fractalize(src) < 0 and (useLimits ? src <= botLimit : true) ? src : na highPrev = ta.valuewhen(fractalTop, src , 0) highPrice = ta.valuewhen(fractalTop, high , 0) lowPrev = ta.valuewhen(fractalBot, src , 0) lowPrice = ta.valuewhen(fractalBot, low , 0) bearSignal = fractalTop and high > highPrice and src < highPrev bullSignal = fractalBot and low < lowPrice and src > lowPrev bearDivHidden = fractalTop and high < highPrice and src > highPrev bullDivHidden = fractalBot and low > lowPrice and src < lowPrev // RSI+MFI f_rsimfi(_period, _multiplier, _tf) => request.security(syminfo.tickerid, _tf, ta.sma((close - open) / (high - low) * _multiplier, _period) - rsiMFIPosY) // WaveTrend f_wavetrend(src, chlen, avg, malen, tf) => tfsrc = request.security(syminfo.tickerid, tf, src) esa = ta.ema(tfsrc, chlen) de = ta.ema(math.abs(tfsrc - esa), chlen) ci = (tfsrc - esa) / (0.015 * de) wwtt1 = request.security(syminfo.tickerid, tf, ta.ema(ci, avg)) wwtt2 = request.security(syminfo.tickerid, tf, ta.sma(wwtt1, malen)) wwttVwap = wwtt1 - wwtt2 wwttOversold = wwtt2 <= oosLevel wwttOverbought = wwtt2 >= OOBBLevel wwttCross = ta.cross(wwtt1, wwtt2) wwttCrossUp = wwtt2 - wwtt1 <= 0 wwttCrossDown = wwtt2 - wwtt1 >= 0 wwttCrosslast = ta.cross(wwtt1 , wwtt2 ) wwttCrossUplast = wwtt2 - wwtt1 <= 0 wwttCrossDownlast = wwtt2 - wwtt1 >= 0 // MACD f_macd(src, fastlen, slowlen, sigsmooth, tf) => fast_ma = request.security(syminfo.tickerid, tf, ta.ema(src, fastlen)) slow_ma = request.security(syminfo.tickerid, tf, ta.ema(src, slowlen)) macd = fast_ma - slow_ma signal = request.security(syminfo.tickerid, tf, ta.sma(macd, sigsmooth)) hist = macd - signal // Get higher timeframe candle f_getTFCandle(_tf) => _open = request.security(ticker.heikinashi(syminfo.tickerid), _tf, open, barmerge.gaps_off, barmerge.lookahead_on) _close = request.security(ticker.heikinashi(syminfo.tickerid), _tf, close, barmerge.gaps_off, barmerge.lookahead_on) _high = request.security(ticker.heikinashi(syminfo.tickerid), _tf, high, barmerge.gaps_off, barmerge.lookahead_on) _low = request.security(ticker.heikinashi(syminfo.tickerid), _tf, low, barmerge.gaps_off, barmerge.lookahead_on) hl2 = (_high + _low) / 2.0 newBar = ta.change(_open) candleBodyDir = _close > _open //////////////////////////////////////////////////////////////////////////////// // // // ====== SERIES, LINES and LABELS ====== // // // //////////////////////////////////////////////////////////////////////////////// // CALCULATE INDICATORS { // RSI rsi = ta.rsi(rsiSRC, rsiLen) rsiColor = rsi <= rsiOversold ? colorGreen : rsi >= rsiOverbought ? colorRed : colorPurple // Calculates WaveTrend = f_wavetrend(wwttMASource, wwttChannelLen, wwttAverageLen, wwttMALen, timeframe.period) // wwtt Divergences = f_findDivs(wwtt2, wwttDivOOBBLevel, wwttDivoosLevel, true) = f_findDivs(wwtt2, wwttDivOOBBLevel_add, wwttDivoosLevel_add, true) = f_findDivs(wwtt2, 0, 0, false) wwttBearDivHidden_ = showHiddenDiv_nl ? wwttBearDivHidden_nl : wwttBearDivHidden wwttBullDivHidden_ = showHiddenDiv_nl ? wwttBullDivHidden_nl : wwttBullDivHidden wwttBearDivColor = wwttShowDiv and wwttBearDiv or wwttShowHiddenDiv and wwttBearDivHidden_ ? colorRed : na wwttBullDivColor = wwttShowDiv and wwttBullDiv or wwttShowHiddenDiv and wwttBullDivHidden_ ? colorGreen : na wwttBearDivColor_add = wwttShowDiv and wwttDivOOBBLevel_addshow and wwttBearDiv_add or wwttShowHiddenDiv and wwttDivOOBBLevel_addshow and wwttBearDivHidden_add ? #9a0202 : na wwttBullDivColor_add = wwttShowDiv and wwttDivOOBBLevel_addshow and wwttBullDiv_add or wwttShowHiddenDiv and wwttDivOOBBLevel_addshow and wwttBullDivHidden_add ? #1b5e20 : na // RSI Divergences = f_findDivs(rsi, rsiDivOOBBLevel, rsiDivoosLevel, true) = f_findDivs(rsi, 0, 0, false) rsiBearDivHidden_ = showHiddenDiv_nl ? rsiBearDivHidden_nl : rsiBearDivHidden rsiBullDivHidden_ = showHiddenDiv_nl ? rsiBullDivHidden_nl : rsiBullDivHidden rsiBearDivColor = rsiShowDiv and rsiBearDiv or rsiShowHiddenDiv and rsiBearDivHidden_ ? colorRed : na rsiBullDivColor = rsiShowDiv and rsiBullDiv or rsiShowHiddenDiv and rsiBullDivHidden_ ? colorGreen : na // Buy signal. buySignal = wwttCross and wwttCrossUp and wwttOversold buySignalDiv = wwttShowDiv and wwttBullDiv or wwttShowDiv and wwttBullDiv_add or rsiShowDiv and rsiBullDiv buySignalDiv_color = wwttBullDiv ? colorGreen : wwttBullDiv_add ? color.new(colorGreen, 60) : rsiShowDiv ? colorGreen : na // Sell signal sellSignal = wwttCross and wwttCrossDown and wwttOverbought sellSignalDiv = wwttShowDiv and wwttBearDiv or wwttShowDiv and wwttBearDiv_add or rsiShowDiv and rsiBearDiv sellSignalDiv_color = wwttBearDiv ? colorRed : wwttBearDiv_add ? color.new(colorRed, 60) : rsiBearDiv ? colorRed : na // standard, or ha smoothed rsi for the line plot and/or histogram float RSI = f_rsi(i_source, i_lenRSI, i_mode) // get OHLC values to use in the plotcandle() = f_rsiHeikinAshi(i_lenHARSI) // shadow, invisible color colShadow = color.rgb(0, 0, 0, 100) color colNone = color.rgb(0, 0, 0, 100) // rsi color //color colRSI = RSI >=30 ? color.red : color.gray color colRSI = RSI < -31 ? color.lime : RSI > 31 ? color.red : color.gray cross_up = RSI > 30 cross_down = RSI < -30 // candle body colouring color bodyColour = C > O ? i_colUp : i_colDown color wickColour = i_colWick //////////////////////////////////////////////////////////////////////////////// // // // ====== DRAWING and PLOTTING ====== // // // //////////////////////////////////////////////////////////////////////////////// plotchar(cross_down and wwttBuyShow and buySignal ? -107 : na, title='Buy circle', char='·', color=color.new(colorGreen, 10), location=location.absolute, size=size.small) plotchar(cross_up and wwttSellShow and sellSignal ? 105 : na, title='Sell circle', char='·', color=color.new(colorRed, 10), location=location.absolute, size=size.small) plotchar(cross_down and wwttDivShow and buySignalDiv and wwttBuyShow and buySignal ? -106 : na, title='Divergence buy circle', char='▲', color=buySignalDiv_color, location=location.absolute, size=size.tiny, offset=-2, transp=10) plotchar(cross_up and wwttDivShow and sellSignalDiv and wwttSellShow and sellSignal ? 106 : na, title='Divergence sell circle', char='▼', color=sellSignalDiv_color, location=location.absolute, size=size.tiny, offset=-2, transp=10) //Alerts alertcondition((cross_down and wwttBuyShow and buySignal and wwttDivShow and buySignalDiv) or (cross_up and wwttSellShow and sellSignal and wwttDivShow and sellSignalDiv), title='Buy/Sell Signal', message='Buy/Sell Signal')
Индикатор Pine Script®
от slvkmr82
Relative Strength Index//@version=6 indicator(title="Relative Strength Index", shorttitle="RSI", format=format.price, precision=2, timeframe="", timeframe_gaps=true) // RSI Settings rsiLengthInput = input.int(14, minval=1, title="RSI Length", group="RSI Settings") rsiSourceInput = input.source(close, "Source", group="RSI Settings") calculateDivergence = input.bool(false, title="Calculate Divergence", group="RSI Settings", display = display.data_window, tooltip = "Calculating divergences is needed in order for divergence alerts to fire.") // RSI Calculation change = ta.change(rsiSourceInput) up = ta.rma(math.max(change, 0), rsiLengthInput) down = ta.rma(-math.min(change, 0), rsiLengthInput) rsi = down == 0 ? 100 : up == 0 ? 0 : 100 - (100 / (1 + up / down)) // Smoothing MA inputs GRP = "Smoothing" TT_BB = "Only applies when 'SMA + Bollinger Bands' is selected. Determines the distance between the SMA and the bands." maTypeInput = input.string("SMA", "Type", options = , group = GRP, display = display.data_window) maLengthInput = input.int(14, "Length", group = GRP, display = display.data_window) bbMultInput = input.float(2.0, "BB StdDev", minval = 0.001, maxval = 50, step = 0.5, tooltip = TT_BB, group = GRP, display = display.data_window) var enableMA = maTypeInput != "None" var isBB = maTypeInput == "SMA + Bollinger Bands" // Smoothing MA Calculation ma(source, length, MAtype) => switch MAtype "SMA" => ta.sma(source, length) "SMA + Bollinger Bands" => ta.sma(source, length) "EMA" => ta.ema(source, length) "SMMA (RMA)" => ta.rma(source, length) "WMA" => ta.wma(source, length) "VWMA" => ta.vwma(source, length) // Calculate MA smoothingMA = enableMA ? ma(rsi, maLengthInput, maTypeInput) : na // Define RSI color based on position relative to MA rsiColor = enableMA ? (rsi > smoothingMA ? color.green : color.red) : (rsi > rsi ? color.green : color.red) // Plot RSI with dynamic color rsiPlot = plot(rsi, "RSI", color = rsiColor) // Horizontal lines rsiUpperBand = hline(70, "RSI Upper Band (70)", color=#787B86, linestyle=hline.style_solid) rsiUpperMidBand = hline(60, "RSI Upper Mid Band (60)", color=color.new(#787B86, 30), linestyle=hline.style_dashed) midline = hline(50, "RSI Middle Band (50)", color=color.new(#787B86, 50)) rsiLowerMidBand = hline(40, "RSI Lower Mid Band (40)", color=color.new(#787B86, 30), linestyle=hline.style_dashed) rsiLowerBand = hline(30, "RSI Lower Band (30)", color=#787B86, linestyle=hline.style_solid) // Fills fill(rsiUpperBand, rsiUpperMidBand, color=color.new(color.green, 90), title="Extreme Overbought Zone") fill(rsiUpperMidBand, midline, color=color.new(color.green, 95), title="Overbought Zone") fill(midline, rsiLowerMidBand, color=color.new(color.red, 95), title="Oversold Zone") fill(rsiLowerMidBand, rsiLowerBand, color=color.new(color.red, 90), title="Extreme Oversold Zone") midLinePlot = plot(50, color = na, editable = false, display = display.none) fill(rsiPlot, midLinePlot, 100, 70, top_color = color.new(color.green, 0), bottom_color = color.new(color.green, 100), title = "Overbought Gradient Fill") fill(rsiPlot, midLinePlot, 30, 0, top_color = color.new(color.red, 100), bottom_color = color.new(color.red, 0), title = "Oversold Gradient Fill") // Smoothing MA plots smoothingStDev = isBB ? ta.stdev(rsi, maLengthInput) * bbMultInput : na plot(smoothingMA, "RSI-based MA", color=color.yellow, display = enableMA ? display.all : display.none, editable = enableMA) bbUpperBand = plot(smoothingMA + smoothingStDev, title = "Upper Bollinger Band", color=color.green, display = isBB ? display.all : display.none, editable = isBB) bbLowerBand = plot(smoothingMA - smoothingStDev, title = "Lower Bollinger Band", color=color.green, display = isBB ? display.all : display.none, editable = isBB) fill(bbUpperBand, bbLowerBand, color= isBB ? color.new(color.green, 90) : na, title="Bollinger Bands Background Fill", display = isBB ? display.all : display.none, editable = isBB) // Divergence (unchanged) lookbackRight = 5 lookbackLeft = 5 rangeUpper = 60 rangeLower = 5 bearColor = color.red bullColor = color.green textColor = color.white noneColor = color.new(color.white, 100) _inRange(cond) => bars = ta.barssince(cond) rangeLower <= bars and bars <= rangeUpper plFound = false phFound = false bullCond = false bearCond = false rsiLBR = rsi if calculateDivergence plFound := not na(ta.pivotlow(rsi, lookbackLeft, lookbackRight)) plFoundPrev = plFound inRangeBull = _inRange(plFoundPrev) rsiHL = rsiLBR > ta.valuewhen(plFound, rsiLBR, 1) and inRangeBull lowLBR = low priceLL = lowLBR < ta.valuewhen(plFound, lowLBR, 1) bullCond := priceLL and rsiHL and plFound phFound := not na(ta.pivothigh(rsi, lookbackLeft, lookbackRight)) phFoundPrev = phFound inRangeBear = _inRange(phFoundPrev) rsiLH = rsiLBR < ta.valuewhen(phFound, rsiLBR, 1) and inRangeBear highLBR = high priceHH = highLBR > ta.valuewhen(phFound, highLBR, 1) bearCond := priceHH and rsiLH and phFound plot(plFound ? rsiLBR : na, offset = -lookbackRight, title = "Regular Bullish", linewidth = 2, color = (bullCond ? bullColor : noneColor), display = display.pane, editable = calculateDivergence) plotshape(bullCond ? rsiLBR : na, offset = -lookbackRight, title = "Regular Bullish Label", text = " Bull ", style = shape.labelup, location = location.absolute, color = bullColor, textcolor = textColor, display = display.pane, editable = calculateDivergence) plot(phFound ? rsiLBR : na, offset = -lookbackRight, title = "Regular Bearish", linewidth = 2, color = (bearCond ? bearColor : noneColor), display = display.pane, editable = calculateDivergence) plotshape(bearCond ? rsiLBR : na, offset = -lookbackRight, title = "Regular Bearish Label", text = " Bear ", style = shape.labeldown, location = location.absolute, color = bearColor, textcolor = textColor, display = display.pane, editable = calculateDivergence) alertcondition(bullCond, title='Regular Bullish Divergence', message="Found a new Regular Bullish Divergence, `Pivot Lookback Right` number of bars to the left of the current bar.") alertcondition(bearCond, title='Regular Bearish Divergence', message='Found a new Regular Bearish Divergence, `Pivot Lookback Right` number of bars to the left of the current bar.')
Индикатор Pine Script®
от andrescachogutierrez
Pinbar DetectorFinding a pinbars on m5 timeframe. In order for the indicator to search for pinbars specifically on the M5 timeframe (5 minutes), you need to set this value in the tf parameter by default. In the current code, the timeframe is set via input.timeframe, and you can either change it manually in the indicator settings after adding it to the chart, or set M5 directly in the code. Here's how to do it: Change in code: In the line with input.timeframe, replace the default value "D" with "5" (in Pine Script, timeframes are designated as follows: "5" for 5 minutes, "15" for 15 minutes, "60" for 1 hour, etc.).
Индикатор Pine Script®
от Feran111
TREND FINDER BY MRS (SSL Hybrid + Delta Candles)Perfect for identifying trend direction, continuation signals, and exit points while visualizing real-time buying/selling pressure. A sophisticated multi-timeframe trading system combining: SSL Hybrid Trend Analysis (HMA/JMA/EMA baseline) Volume Delta Visualization (colored candles) ATR Volatility Bands (optional) Key Features: 1. Smart Trend Detection Custom Baseline MA: Choose between HMA, JMA (Jurik), or EMA with adjustable length Trend-Colored Baseline: 🟢 Green = Uptrend (price above & baseline rising) 🔴 Red = Downtrend (price below & baseline falling) 🟠 Orange = Neutral/Transition phase 2. Volume Delta Candles Colors candles based on lower timeframe volume imbalance: 🟢 Dark Green: Strong buying pressure (delta > 20%) 🌱 Light Green: Moderate buying (delta 5-20%) 🔴 Dark Red: Strong selling pressure (delta < -20%) 🌸 Light Red: Moderate selling (delta -5% to -20%) ⚪ Gray: Balanced volume 3. Professional Tools ATR Bands: Visualize volatility with adjustable multiplier Multi-Timeframe Analysis: Delta calculated from lower timeframe (default: 1min) Alerts: Baseline crosses and extreme delta conditions Recommended Settings: Chart Type: Daily (for NNFX method) Baseline: HMA/JMA (60 periods) Delta TF: 1-5min for intraday volume accuracy How Traders Use It: Trend Traders: Follow colored baseline for direction Swing Traders: Use delta extremes for reversals Breakout Traders: Watch ATR band expansions Published Notes: TREND FINDER BY MRS (SSL Hybrid with Delta Candles) By: Rajasekhar Muvvala *"See the trend, read the volume, trade with confidence"* Installation: 1. Add to TradingView via Pine Editor 2. Customize colors/thresholds in settings 3. Apply to daily charts for best results Pro Tip: Combine with: - 200EMA for long-term bias - Horizontal S/R levels - Price action confirmation This description highlights the indicator's unique value while making it accessible for both beginners and advanced traders. The markdown formatting ensures clean presentation when published on trading forums or journals. Would you like me to adjust any technical aspects or emphasize different features?
Индикатор Pine Script®
от mrsekhar
4
RSI + MFI Momentum Mapper - CoffeeKillerRSI + MFI Momentum Mapper - CoffeeKiller Indicator Guide Welcome traders! This guide will walk you through the RSI + MFI Momentum Mapper indicator, an innovative market analysis tool developed by CoffeeKiller that combines two powerful oscillators to create a comprehensive momentum visualization system. 🔔 **Warning: This Is Not a Standard RSI or MFI Indicator** 🔔 This indicator combines and normalizes RSI and MFI data to create a unified momentum representation with boundary detection and peak signaling features. Core Concept: Combined Momentum Analysis The foundation of this indicator lies in merging the strengths of two complementary oscillators - Relative Strength Index (RSI) and Money Flow Index (MFI) - to provide a more robust momentum signal that accounts for both price action and volume. Directional Columns: Momentum Strength - Positive Green Columns: Bullish momentum - Negative Red Columns: Bearish momentum - Color intensity varies based on momentum strength - Special coloring for new high/low boundaries Marker Lines: Dynamic Support/Resistance - High Marker Line (Magenta): Tracks the highest point reached during a bullish phase - Low Marker Line (Cyan): Tracks the lowest point reached during a bearish phase - Creates visual boundaries showing momentum extremes Peak Detection System: - Triangular markers identify significant local maxima and minima - Background highlighting shows important momentum peaks - Helps identify potential reversal points and momentum exhaustion Reference Lines: - Zero Line (Gray): Divides bullish from bearish momentum - High Line (+1): Upper threshold for extremely bullish conditions - Low Line (-1): Lower threshold for extremely bearish conditions Core Components 1. Oscillator Normalization - RSI and MFI values centered around zero - Values scaled to create consistent visualization - Normalized range typically between -1 and +1 - Combination of indicators for signal reliability 2. Boundary Tracking System - Automatic detection of highest values in bullish phases - Automatic detection of lowest values in bearish phases - Step-line visualization of boundaries - Color-coded for easy identification 3. Peak Detection System - Identification of local maxima and minima - Background highlighting of significant peaks - Triangle markers for peak visualization - Zero-line cross detection for trend changes 4. Signal Smoothing - Signal line calculation via SMA - Helps filter noise and identify trends - Provides confirmation of momentum direction Main Features Oscillator Settings - Customizable RSI length for sensitivity control - Customizable MFI length for sensitivity control - Normalized display for consistent visualization - Signal smoothing for clearer readings Visual Elements - Color-coded columns showing momentum direction and strength - Dynamic marker lines for momentum boundaries - Peak triangles for significant turning points - Background highlighting for peak identification - Reference lines for momentum threshold levels Signal Generation - Zero-line crosses for trend change signals - Boundary breaks for momentum strength - Peak formation for potential reversals - Color changes for momentum direction and acceleration Customization Options - RSI and MFI length parameters - Marker line visibility and colors - Peak marker color selection - Peak background display options Trading Applications 1. Trend Identification - Directional line crossing above zero: bullish trend beginning - Directional line crossing below zero: bearish trend beginning - Column color: indicates momentum direction - Column height: indicates momentum strength 2. Reversal Detection - Peak triangles after extended trend: potential exhaustion - Background highlighting: significant reversal points - Directional line approaching marker lines: potential trend change - Color shifts from bright to muted: decreasing momentum 3. Momentum Analysis - Breaking above previous high boundary: accelerating bullish momentum - Breaking below previous low boundary: accelerating bearish momentum - Special coloring (magenta/cyan): boundary breaks indicating strength - Approaching +1/-1 lines: extreme momentum conditions 4. Market Structure Assessment - Consecutive higher peaks: strengthening bullish structure - Consecutive lower troughs: strengthening bearish structure - Peak comparisons: relative strength of momentum phases - Boundary line steps: market structure levels Optimization Guide 1. Oscillator Settings - RSI Length: Default 14 provides balanced signals - Lower values (7-10): More responsive, potentially noisier - Higher values (20-30): Smoother, fewer false signals - MFI Length: Default 14 provides balanced signals - Lower values: More responsive to volume changes - Higher values: Less sensitive to short-term volume spikes 2. Visual Customization - Marker Line Colors: Adjust for visibility on your chart - Peak Marker Color: Default yellow provides good contrast - Enable/disable background highlights based on preference - Consider chart background when selecting colors 3. Signal Interpretation - Stronger signals: When directional line approaches +1/-1 - Confirmation: When peaks form after extended momentum - Early warnings: When color intensity changes before direction - Trend strength: Distance between zero line and current reading 4. Reference Line Usage - Zero line: Primary trend divider - +1/-1 lines: Extreme momentum thresholds - Marker lines: Dynamic support/resistance levels - Distance from reference: Momentum strength measure Best Practices 1. Signal Confirmation - Wait for zero-line crosses to confirm trend changes - Look for peak formations to identify potential reversals - Check for boundary breaks to confirm strong momentum - Use with price action for entry/exit precision 2. Timeframe Selection - Lower timeframes: more signals, potential noise - Higher timeframes: cleaner signals, less frequent - Multiple timeframes: confirm signals across time horizons - Match to your trading style and holding period 3. Market Context - Strong bullish phase: positive columns breaking above marker line - Strong bearish phase: negative columns breaking below marker line - Columns approaching zero: potential trend change - Columns approaching +1/-1: extreme conditions, potential reversal 4. Combining with Other Indicators - Use with trend indicators for confirmation - Pair with other oscillators for divergence detection - Combine with volume analysis for validation - Consider support/resistance levels with boundary lines Advanced Trading Strategies 1. Boundary Break Strategy - Enter long when directional line breaks above previous high marker line - Enter short when directional line breaks below previous low marker line - Use zero-line as initial stop-loss reference - Take profits at formation of opposing peaks 2. Peak Trading Strategy - Identify significant peaks with triangular markers - Look for consecutive lower peaks in bullish phases for shorting opportunities - Look for consecutive higher troughs in bearish phases for buying opportunities - Use zero-line crosses as confirmation 3. Extreme Reading Strategy - Look for directional line approaching +1/-1 lines - Watch for color changes and peak formations - Enter counter-trend positions after confirmed peaks - Use tight stops due to extreme momentum conditions 4. Column Color Strategy - Enter long when columns turn bright green (increasing momentum) - Enter short when columns turn bright red (increasing momentum) - Exit when color intensity fades (decreasing momentum) - Use marker lines as dynamic support/resistance Practical Analysis Examples Bullish Market Scenario - Directional line crosses above zero line - Green columns grow in height and intensity - High marker line forms steps upward - Peak triangles appear at local maxima - Background highlights appear at significant momentum peaks Bearish Market Scenario - Directional line crosses below zero line - Red columns grow in depth and intensity - Low marker line forms steps downward - Peak triangles appear at local minima - Background highlights appear at significant momentum troughs Consolidation Scenario - Directional line oscillates around zero line - Column colors alternate frequently - Marker lines remain relatively flat - Few or no new peak highlights appear - Directional values remain small Understanding Market Dynamics Through RSI + MFI Momentum Mapper At its core, this indicator provides a unique lens to visualize market momentum by combining two complementary oscillators: 1. Combined Strength: By averaging RSI (price-based) and MFI (volume-based), the indicator provides a more comprehensive view of market momentum that considers both price action and buying/selling pressure. 2. Normalized Scale: The indicator normalizes values around zero, making it easier to identify bullish vs bearish conditions and the relative strength of momentum in either direction. 3. Dynamic Boundaries: The marker lines create a visual representation of the "high water marks" of momentum in both directions, helping to identify when markets are making new momentum extremes. 4. Exhaustion Signals: The peak detection system highlights moments where momentum has reached a local maximum or minimum, often precursors to reversals or consolidations. Remember: - Combine signals from directional line, marker lines, and peak formations - Use appropriate timeframe settings for your trading style - Customize the indicator to match your visual preferences - Consider market conditions and correlate with price action This indicator works best when: - Used as part of a comprehensive trading system - Combined with proper risk management - Applied with an understanding of current market conditions - Signals are confirmed by price action and other indicators DISCLAIMER: This indicator and its signals are intended solely for educational and informational purposes. They do not constitute financial advice. Trading involves significant risk of loss. Always conduct your own analysis and consult with financial professionals before making trading decisions.
Индикатор Pine Script®
от CoffeeKiller
Volume Delta Divergence + Bollinger Bands (Filtered)📌 Volume Delta Divergence with Bollinger Bands (Filtered) This script combines Volume Delta Divergence detection with Bollinger Bands to help identify high-probability buy and sell signals based on volume behavior and price action. 🔍 Key Features: ✅ Divergence Detection: Identifies when price moves in one direction (green/red candle), but the delta volume (buy vs sell volume) moves in the opposite direction — a common sign of hidden weakness or strength. ✅ Volume Strength Filter: Filters out weak divergence signals by checking if the delta volume is significantly larger than its historical average (user-defined lookback). ✅ Breakout Confirmation: A signal is only triggered when the next candle breaks the high or low of the divergence candle. ✅ Bollinger Bands Overlay: Adds standard Bollinger Bands (20-period SMA ± 2 standard deviations by default) for trend and volatility analysis. ✅ Clean Signal Display: Plots "BUY" and "SELL" labels only when strong divergences occur, reducing noise and false signals. ⚙️ User Inputs: Custom timeframe for volume delta analysis Delta volume average lookback period Bollinger Band settings (length & deviation) 🧠 How to Use: Use the divergence signals in conjunction with Bollinger Band positioning. Consider SELL signals stronger when they occur near the upper Bollinger Band, and BUY signals near the lower band. Combine with price action or RSI for added confluence.
Индикатор Pine Script®
от electricalPers55976
Price action plus//The system combines the divergence of A/D and OBV with identifying reversal points using Japanese candlestick patterns, creating an enhanced version of price action. This helps investors more easily and accurately recognize reversal patterns in technical analysis. Divergence of A/D vs. OBV includes: Positive divergence: Identifies smart money leaving the market. Negative divergence: Identifies smart money entering the market. Reversal candlestick patterns include: Buy signals: Morning Star, Bullish Engulfing, Hammer. Strong Buy signals: Buy signals + Negative divergence Sell signals: Evening Star, Bearish Engulfing, Shooting Star. Strong Sell signals : Sell signals + Positive divergence //Hope this system will be helpful for you!
Индикатор Pine Script®
от HuynhDucTai
Open Price on Selected TimeframeIndicator Name: Open Price on Selected Timeframe Short Title: Open Price mtf Type: Technical Indicator Description: Open Price on Selected Timeframe is an indicator that displays the Open price of a specific timeframe on your chart, with the ability to dynamically change the color of the open price line based on the change between the current candle's open and the previous candle's open. Selectable Timeframes: You can choose the timeframe you wish to monitor the Open price of candles, ranging from M1, M5, M15, H1, H4 to D1, and more. Dynamic Color Change: The Open price line changes to green when the open price of the current candle is higher than the open price of the previous candle, and to red when the open price of the current candle is lower than the open price of the previous candle. This helps users quickly identify trends and market changes. Features: Easy Timeframe Selection: Instead of editing the code, users can select the desired timeframe from the TradingView interface via a dropdown. Dynamic Color Change: The color of the Open price line changes automatically based on whether the open price of the current candle is higher or lower than the previous candle. Easily Track Open Price Levels: The indicator plots a horizontal line at the Open price of the selected timeframe, making it easy for users to track this important price level. How to Use: Select the Timeframe: Users can choose the timeframe they want to track the Open price of the candles. Interpret the Color Signal: When the open price of the current candle is higher than the open price of the previous candle, the Open price line is colored green, signaling an uptrend. When the open price of the current candle is lower than the open price of the previous candle, the Open price line turns red, signaling a downtrend. Observe the Open Price Levels: The indicator will draw a horizontal line at the Open price level of the selected timeframe, allowing users to easily monitor this important price. Benefits: Enhanced Technical Analysis: The indicator allows you to quickly identify trends and market changes, making it easier to make trading decisions. User-Friendly: No need to modify the code; simply select your preferred timeframe to start using the indicator. Disclaimer: This indicator is not a complete trading signal. It only provides information about the Open price and related trends. Users should combine it with other technical analysis tools to make more informed trading decisions. Summary: Open Price on Selected Timeframe is a simple yet powerful indicator that helps you track the Open price on various timeframes with the ability to change colors dynamically, providing a visual representation of the market's trend.
Индикатор Pine Script®
от Unikryptonian
Average Price Bar (APB) with Dynamic EMATrading Made Simple: APB + Dynamic EMA with Stochastic (8,3,3) Strategy Introduction The "Trading Made Simple" strategy, originally developed by BigE on ForexFactory in 2011, is a powerful yet straightforward approach to trading that combines price action, moving averages, and momentum indicators to identify high-probability setups. This enhanced version integrates: Average Price Bar (APB) – A smoothed candlestick representation that filters market noise. Dynamic EMA (5-period, HLC3-based) – Acts as a trend filter, changing color based on its position relative to price. Stochastic (8,3,3) – A fast momentum oscillator to confirm overbought/oversold conditions. Core Trading Rules (BigE's Original Concept) Trend Direction: The EMA defines the trend (bullish if price is above, bearish if below). Stochastic Confirmation: Long Trades: Look for Stochastic crossing up from oversold (<20) while price is above the EMA. Short Trades: Look for Stochastic crossing down from overbought (>80) while price is below the EMA. APB as Entry Confirmation: A bullish APB close above the EMA strengthens long signals. A bearish APB close below the EMA strengthens short signals. Why This Combination Works APB + EMA provides a clean trend bias, reducing false signals. Stochastic (8,3,3) adds momentum confirmation, ensuring entries are timed well. The background color shift (green/red) makes trend reversals visually intuitive. This system is ideal for swing traders and day traders looking for a rule-based, discretionary approach that removes emotional decision-making while keeping trading simple and effective.
Индикатор Pine Script®
от khai_mm_cao