Регистрация

Схождение/расхождение скользящих средних (MACD)

MACD for WA1) I updated MACD formula to work with the Elliott Wave Principle 2) I changed the standard parameters and indicator’s display type as default for use in Wave Analysis 1) Актуализировал формулу MACD для работы по Волновому Принципу Эллиотта 2) Изменил по умолчанию стандартные параметры и вид отображения индикатора для использования в Волновом Анализе
Индикатор Pine Script™
от koffe09
7
MACD Strategy KMACK Rev 1.1Hull smoothed 45/10 macd Please note that the macd/rsi values do not print unless the current day is Monday-Friday and the market will be open. 14 period hull smoothed rsi marks the rsi value at each macd reversal and will not signal a long position above 70 or a short position below 30 Macd and rsi will only display on the current day and will only display the last 2 hours Lit candles occur after 0920 nyse time Alerts or entries will only fire after 0931 nyse time Entry signal will confirm with the 5 minute candle. Long entry requires the current 5 minute candle to close>=hlc3 Short entry requires the current 5 minute candle to close<=hlc3 Buy/sell alerts will only fire in the last 10 seconds of the realtime (current) bar Options: Select bias Modify macd lookback period(s) Alerts: Buy Sell Rsi crossing into the power region (60) Rsi crossing into the weakness region (40) Current strategy exits position upon signal opposite to selected bias, this is for simplicity. There are currently no add-on strat signals but the alerts/lit candles will fire Successful trades average >55% with an average profit factor of 3% Net profit averages 3% Max drawdown averages below 0.25% Added order size input Added show/hide strat signals. Still lights the bars green/red. Make sure your bar color setting in tv is set to a transparent color so you can see the bright reds and greens. Added a couple lines of code that fire the alert/strat if macd reverses and the corresponding 5min candle does not agree and the following candle does agree. Added an average of 1.5% winning trades. Message me for free trial access
Стратегия Pine Script™
от kmack282
2
Full strategy AllinOne with risk management MACD RSI PSAR ATR MAHey, I am glad to present you one of the strategies where I put a lot of time in it. This strategy can be adapted to all type of timecharts like scalping, daytrading or swing. The context is the next one : First we have the ATR to calculate our TP/SL points. At the same time we have another rule once we enter(we enter based on % risk from total equity, in this example 1%, at the same time, lowest ammount for this example is 0.1 lots, but can be modified to 0.01), so we can exit both by tp/sl points, or by losing 1% of our equity or winning 1% of our total equity. It's dinamic. The strategy is made from Trend direction : PSAR First confirmation point : Crossover between 10EMA and Bollinger bands middle point Second confirmation MACD histogram Third confirmation RSI overbought/oversold levels For entries : we check trend with psar, then once ema cross bb middle point, we confirm together with rsi level for overbought/oversold and macd histogram ( > 0 or <0). We exit, when we have opposite sign, like from buy to sell or sell to buy, or when we reach tp/sl points, or when we reach % basaed equity points. It can be changed to be fixed lots, or fixed tp/sl , you just have to uncomment the size from entries, and tp/sl lines. At the same time, it has the possibility if one desires, to trade only concrete forex session like european, asian and so on for intraday trading. Hope you enjoy it. Let me know how it goes.
Стратегия Pine Script™
от SoftKill21
29
MACD-X, More Than MACD by DGTMoving Average Convergence Divergence – MACD The most popular indicator used in technical analysis, the moving average convergence divergence (MACD), created by Gerald Appel. MACD is a trend-following momentum indicator, designed to reveal changes in the strength, direction, momentum, and duration of a trend in a financial instrument’s price Historical evolution of MACD, - Gerald Appel created the MACD line, - Thomas Aspray added the histogram feature to MACD - Giorgos E. Siligardos created a leader of MACD MACD employs two Moving Averages of varying lengths (which are lagging indicators) to identify trend direction and duration. Then, MACD takes the difference in values between those two Moving Averages (MACD Line) and an EMA of those Moving Averages (Signal Line) and plots that difference between the two lines as a histogram which oscillates above and below a center Zero Line. The histogram is used as a good indication of a security's momentum. Mathematically expressed as; macd = ma(source, fast_length) – ma(source, slow_length) signal = ma(macd, signal_length) histogram = macd – signal where exponential moving average (ema) is in common use as a moving average (ma) fast_length = 12 slow_length = 26 signal_length = 9 The MACD indicator is typically good for identifying three types of basic signals ; Signal Line Crossovers A Signal Line Crossover is the most common signal produced by the MACD. On the occasions where the MACD Line crosses above or below the Signal Line, that can signify a potentially strong move. The standard interpretation of such an event is a recommendation to buy if the MACD line crosses up through the Signal Line (a "bullish" crossover), or to sell if it crosses down through the Signal Line (a "bearish" crossover). These events are taken as indications that the trend in the financial instrument is about to accelerate in the direction of the crossover. Zero Line Crossovers Zero Line Crossovers occur when the MACD Line crossed the Zero Line and either becomes positive (above 0) or negative (below 0). A change from positive to negative MACD is interpreted as "bearish", and from negative to positive as "bullish". Zero crossovers provide evidence of a change in the direction of a trend but less confirmation of its momentum than a signal line crossover Divergence Divergence is another signal created by the MACD. Simply, divergence occurs when the MACD and actual price are not in agreement. A "positive divergence" or "bullish divergence" occurs when the price makes a new low but the MACD does not confirm with a new low of its own. A "negative divergence" or "bearish divergence" occurs when the price makes a new high but the MACD does not confirm with a new high of its own. A divergence with respect to price may occur on the MACD line and/or the MACD Histogram Moving Average Crossovers , another hidden signal that MACD Indicator identifies Many traders will watch for a short-term moving average to cross above a longer-term moving average and use this to signal increasing upward momentum. This bullish crossover suggests that the price has recently been rising at a faster rate than it has in the past, so it is a common technical buy sign. Conversely, a short-term moving average crossing below a longer-term average is used to illustrate that the asset's price has been moving downward at a faster rate and that it may be a good time to sell. Moving Average Crossovers in reality is Zero Line Crossovers, the value of the MACD indicator is equal to zero each time the two moving averages cross over each other. For easy interpretation by trades, Zero Line Crossovers are simply described as positive or negative MACD False signals Like any forecasting algorithm, the MACD can generate false signals. A false positive, for example, would be a bullish crossover followed by a sudden decline in a financial instrument. A false negative would be a situation where there is bearish crossover, yet the financial instrument accelerated suddenly upwards What is “MACD-X” and Why it is “More Than MACD” In its simples form, MACD-X implements variety of different calculation techniques applied to obtain MACD Line, ability to use of variety of different sources , including Volume related sources, and can be plotted along with MACD in the same window and all those features are available and presented within a single indicator, MACD-X Different calculation techniques lead to different values for MACD Line, as will further discuss below, and as a consequence the signal line and the histogram values will differentiate accordingly. Mathematical calculation of both signal line and the histogram remain the same. Main features of MACD-X ; 1- Introduces different proven techniques applied on MACD calculation , such as MACD-Histogram, MACD-Leader and MACD-Source, besides the traditional MACD (MACD-TRADITIONAL) • MACD-Traditional , by Gerald Appel It is the MACD that we know, stated as traditional just to avoid confusion with other techniques used with this study • MACD-Histogram , by Thomas Aspray The MACD-Histogram measures the distance between MACD and its signal line (the 9-day EMA of MACD). Aspray developed the MACD-Histogram to anticipate signal line crossovers in MACD. Because MACD uses moving averages and moving averages lag price, signal line crossovers can come late and affect the reward-to-risk ratio of a trade. Bullish or bearish divergences in the MACD-Histogram can alert chartists to an imminent signal line crossover in MACD The MACD-Histogram represents the difference between MACD and its 9-day EMA, the signal line. Mathematically, macdx = macd - ma(macd, signal_length) Aspray's contribution served as a way to anticipate (and therefore cut down on lag) possible MACD crossovers which are a fundamental part of the indicator. Here come a question, what if repeat the same calculations once more (macdh2 = macdh - ma(macdh, signal_length), will it be even better, this question will remain to be tested • MACD-Leader , by Giorgos E. Siligardos, PhD MACD Leader has the ability to lead MACD at critical situations. Almost all smoothing methods encounter in technical analysis are based on a relative-weighted sum of past prices, and the Leader is no exception. The concealed weights of MACD Leader are such that more relative weight is used in the more recent prices than the respective weights used by the components of MACD. In effect, the Leader expresses more changes in average price dynamics for the recent price movement than MACD, thus eventually leading MACD, especially when significant trend changes are about to take place. Siligardos creates two less-laggard moving averages indicators in its formula using the same periods as follows Indicator1 = ma(source, fast_length) + ma(source - ma(source, fast_length), fast_length) Indicator2 = ma(source, slow_length) + ma(source - ma(source, slow_length), slow_length) and then take the difference: Indicator1 - Indicator2 The result is a new MACD Leader indicator macdx = macd + ma(source - fast_ma, fast_length) - ma(source - slow_ma, slow_length) • MACD-Source , a custom experimental interpretation of mine , MACD Source, presents an application of MACD that evaluates Source/MA Ratio, relatively with less lag, as a basis for MACD Line, also can be expressed as source convergence/divergence to its moving average. Among the various techniques for removing the lag between price and moving average (MA) of the price, one in particular stands out: the addition to the moving average of a portion of the difference between the price and MA. MACD Source, is based on signal length mean of the difference between Source and average value of shot length and long length moving average of the source (Source/MA Ratio), where the source is actual value and hence no lag and relatively less lag with the average value of moving average of the source . Mathematically expressed as, macdx = ma(source - avg( ma(source, fast_length), ma(source, slow_length) ), signal_length) MACD Source provides relatively early crossovers comparing to MACD and better momentum direction indications, assuming the lengths are set to same values For further details, you are invited to check the following two studies, where the first seeds were sown of the MACD-Source idea Price Distance to its Moving Averages study, adapts the idea of “Prices high above the moving average (MA) or low below it are likely to be remedied in the future by a reverse price movement", presented in an article by Denis Alajbeg, Zoran Bubas and Dina Vasic published in International Journal of Economics, Commerce and Management First MACD like interpretation comes with the second study named as “ P-MACD ”, where P stands for price, P-MACD study attempts to display relationship between Price and its 20 and 200-period moving average. Calculations with P-MACD were based on price distance (convergence/divergence) to its 200-period moving average, and moving average convergence/divergence of 20-period moving average to 200-period moving average of price. Now as explained above, MACD Source is a one adapted with traditional MACD, where Source stands for Price, Volume Indicator etc, any source applicable with MACD concept 2- Allows usage of variety of different sources, including Volume related indicators The most common usage of Source for MACD calculation is close value of the financial instruments price. As an experimental approach, this study will allow source to be selected as one of the following series; • Current Close Price (close) • Average of High, Low, and Close Price (hlc3) • On Balance Volume (obv) • Accumulation Distribution (accdist) • Price Volume Trend (pvt) Where, -Current Close Price and Average of High, Low, and Close Price are price actions of the financial instrument - Accumulation Distribution is a volume based indicator designed to measure underlying supply and demand - On Balance Volume (OBV) , is a momentum indicator that measures positive and negative volume flow - Price Volume Trend (PVT) is a momentum based indicator used to measure money flow 3- Can be plotted along with MACD in the same window using the same scaling Default setting of MACD-X will display MACD-Source with Current Close Price as a source and traditional MACD can be plotted eighter as a companion of MACD-X or can be selected to be plotted alone. Applying both will add ability to compare, or use as a confirmation of one other In case, traditional MACD Is plotted along with MACD-X to avoid misinterpreting, the lines plotted, the area between MACD-X Line and Signal-X Line is highlighted automatically, even if the highlight option not selected. Otherwise highlight will be applied only if that option selected 4- 4C Histogram Histogram is plotted with four colors to emphasize the momentum and direction 5- Customizable Additional to ability of selecting Calculation Method, Source, plotting along with MACD, there are few other option that allows users to customize the MACD-X indicator Lengths are configurable, default values are set as 12, 26, 9 respectively for fast, slow and smoothing length. Setting lengths to 8,21,5 respectively Is worth checking, slower length moving averages will lead to less lag and earlier reaction to price actions but yet requires a caution and back testing before applying Highlight the area between MACD-X Line and Signal-X Line, with colors emphasising the direction Label can be added to display Calculation Method, Source and Length settings, the aim of this label is to server only as a reminder to trades to be aware of settings while they are occupied with charts, analysis etc. Here comes another question, which is of more importance having the reminder or having the indicators with multi timeframe feature? Build-in Multi Time Frame features of Pine is not supported when labels and lines introduced in the script, there are other methods but brings complexity. To be studied further, this version will be with labels for time being. Epilogue MACD-X is an alternative variant of MACD, the insight/signals provided by MACD are also applicable to MACD-X with early and clear warnings for the changes in the trend. If MACD is essential to your analysis, then it is my guess that after using the MACD-X for a while and familiarizing yourself with its unique character and personality, you will make it an inseparable companion to other indicators in your charts. The various signals generated by MACD/MACD-X are easily interpreted and very few indicators in technical analysis have proved to be more reliable than the MACD, and this relatively simple indicator can quickly be incorporated into any short-term trading strategy Disclaimer : Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitutes professional and/or financial advice. You alone the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Индикатор Pine Script™
от dgtrd
156
MACD++ Strategy [SystemAlpha]This is a strategy based on MACD Oscillator. Instead of using just the normal crossovers, we use trend filters, trailing stop loss and take profit targets. This strategy was developed for crypto, forex and stocks on daily timeframe but feel free to experiment on 15 minutes or higher using heikin ashi or normal candles In this strategy you have a choice of: Trend Filters: - Average Directional Index ( ADX ) – buy when price is trend is up and sell when trend is down. - Moving Average (MA) – buy when price close above the defined moving average and sell when price close below moving average - Parabolic SAR – buy when SAR is above price is above price and sell when SAR is below price. - All - Use ADX , MA and SAR as filters For MA Filter , you can use the “TF MA Type” and "TF MA Period" parameter to select Simple or Exponential Moving Average and length. Stop Loss: - Average True Range (ATR) – ATR % stop as trailing stop loss. - Parabolic SAR ( SAR ) – Parabolic SAR adapted as trailing stop loss. For ATR , you can use the “ATR Trailing Stop Multiplier” parameter to set an initial offset for trailing stop loss. Take Profit Target: - Average True Range (ATR) – ATR % stop as trailing stop loss. - Standard % – Percent as target profit For ATR , you can use the “ATR Take Profit Multiplier” parameter to set an initial offset for trailing stop loss. Additional feature include: - Regular and Hidden Divergence display and alerts STRATEGY ONLY: - Set back test date range - Set trade direction - Long, Short or Both - Use timed exit - Select method and bars - Method 1: Exit after specified number of bars. - Method 2: Exit after specified number of bars, ONLY if position is currently profitable. - Method 3: Exit after specified number of bars, ONLY if position is currently losing. TradingView Links: Alerts: MACD: How to use: 1. Apply the script by browsing through Indicators --> Invite-Only scripts and select the indicator 2. Once loaded, click the gear (settings) button to select/adjust the parameters based on your preference. 3. Wait for the next BUY or SELL signal to enter the trade! Disclaimer: The indicator and signals generated do not constitute investment advice; are provided solely for informational purposes and therefore is not an offer to buy or sell a security; are not warranted to be correct, complete or accurate; and are subject to change without notice.
Стратегия Pine Script™
от systemalphatrader
MACD+ Strategy [SystemAlpha]This is a strategy based on MACD Oscillator . Instead of using just the normal crossovers, we use trend filters, trailing stop loss and take profit targets. This strategy was developed for crypto, forex and stocks on daily timeframe but feel free to experiment on 15 minutes or higher using heikin ashi or normal candles In this strategy you have a choice of: Trend Filters: - Average Directional Index ( ADX ) – buy when price is trend is up and sell when trend is down. - Moving Average (MA) – buy when price close above the defined moving average and sell when price close below moving average - Parabolic SAR – buy when SAR is above price is above price and sell when SAR is below price. - All - Use ADX , MA and SAR as filters For MA Filter , you can use the “TF MA Type” and "TF MA Period" parameter to select Simple or Exponential Moving Average and length. Stop Loss: - Average True Range (ATR) – ATR % stop as trailing stop loss. - Parabolic SAR ( SAR ) – Parabolic SAR adapted as trailing stop loss. For ATR , you can use the “ATR Trailing Stop Multiplier” parameter to set an initial offset for trailing stop loss. Take Profit Target: - Average True Range (ATR) – ATR % stop as trailing stop loss. - Standard % – Percent as target profit For ATR , you can use the “ATR Take Profit Multiplier” parameter to set an initial offset for trailing stop loss. Additional feature include: - Regular and Hidden Divergence display and alerts STRATEGY ONLY: - Set back test date range - Set trade direction - Long, Short or Both - Use timed exit - Select method and bars - Method 1: Exit after specified number of bars. - Method 2: Exit after specified number of bars, ONLY if position is currently profitable. - Method 3: Exit after specified number of bars, ONLY if position is currently losing. TradingView Links: Alerts: MACD: How to use: 1. Apply the script by browsing through Indicators --> Invite-Only scripts and select the indicator 2. Once loaded, click the gear (settings) button to select/adjust the parameters based on your preference. 3. Wait for the next BUY or SELL signal to enter the trade! Disclaimer: The indicator and signals generated do not constitute investment advice; are provided solely for informational purposes and therefore is not an offer to buy or sell a security; are not warranted to be correct, complete or accurate; and are subject to change without notice.
Стратегия Pine Script™
от systemalphatrader
2
MACD+ Alerts [SystemAlpha]This is the alert companion of the MACD+ Strategy . Instead of using just the normal crossovers, we use trend filters, trailing stop loss and take profit targets. This strategy was developed for crypto, forex and stocks on daily timeframe but feel free to experiment on 15 minutes or higher using heikin ashi or normal candles. In this alert you have a choice of: Trend Filters: - Average Directional Index ( ADX ) – buy when price is trend is up and sell when trend is down. - Moving Average (MA) – buy when price close above the defined moving average and sell when price close below moving average - Parabolic SAR – buy when SAR is above price is above price and sell when SAR is below price. - All - Use ADX , MA and SAR as filters For MA Filter , you can use the “TF MA Type” and "TF MA Period" parameter to select Simple or Exponential Moving Average and length. Stop Loss: - Average True Range (ATR) – ATR % stop as trailing stop loss. - Parabolic SAR ( SAR ) – Parabolic SAR adapted as trailing stop loss. For ATR , you can use the “ATR Trailing Stop Multiplier” parameter to set an initial offset for trailing stop loss. Take Profit Target: - Average True Range (ATR) – ATR % stop as trailing stop loss. - Standard % – Percent as target profit For ATR , you can use the “ATR Take Profit Multiplier” parameter to set an initial offset for trailing stop loss. Additional feature include: - Regular and Hidden Divergence display and alerts Alerts: When creating alerts use “Once Per Bar Close” parameter for Long and Short and “Once Per Bar” for Close, Trailing Stop, Take Profit and Divergence. TradingView Links: Strategy: MACD: How to use: 1. Apply the script by browsing through Indicators --> Invite-Only scripts and select the indicator 2. Once loaded, click the gear (settings) button to select/adjust the parameters based on your preference. 3. Wait for the next BUY or SELL signal to enter the trade! Disclaimer: The indicator and signals generated do not constitute investment advice; are provided solely for informational purposes and therefore is not an offer to buy or sell a security; are not warranted to be correct, complete or accurate; and are subject to change without notice.
Индикатор Pine Script™
от systemalphatrader
MACD Crossover Trading Strategy tested 100xI have scripted recently seen youtube video MACD Crossover Trading Strategy tested 100x to see the actual results. Strategy longs if: - macd line crossover signal line above zero and price closes above baseline Strategy shorts if: - macd line crossunder singnal line below zero and price closes below baseline As baseline is used ema(200) As Stop-loss is used swing low/high calculated from last 50 candless or baseline value As Take-profit is used stop-loss multiplied by RRR 1.5 Settings can be adjusted as you like
Стратегия Pine Script™
от CryptoTrendTrader
MACD VWAP IndicatorThis indicator uses a combination of the VWAP, EMA 9 and parts of the MACD in order to detect a bullish or bearish trend. How to trade it: Set SL either below or above the VWAP line (orange) and TP to 1:1.5 ratio (depending on last few candles, of course). If EMA200 is close by then place SL either below or above EMA200 (blue) and TP to 1:1.5 ratio Important: Best traded in 15M, 30M => Intraday. Have fun! :)
Индикатор Pine Script™
от mastixmc
14
MACD Crossover Trend IndicatorThis is a very simple " the trend is your friend " indicator - if you are consistent! How this indicator works: This indicator detects MACD Crossovers based on the current trend. It checks wether the current close price is above or below the 200 EMA and therefore decides whether we are in an up- or down trend. UP-TREND: If the price is above the EMA200, the MACD is below 0 and crosses up the signal line, then this is a BUY signal! DOWN-TREND: If the price is below the EMA200, MACD is above 0 and crosses down the signal line, then this is a SELL signal! You can also add an alert, that keeps you informed, once one of these scenario happens for a certain pair! With this indicator you will never enter against the trend. Have fun! :)
Индикатор Pine Script™
от mastixmc
13
MACD Crossover Trend IndicatorHow this indicator works: This indicator detects MACD Crossovers based on the current trend. It checks wether the current close price is above or below the 200 EMA and therefore decides whether we are in an up- or down trend. UP-TREND: If the MACD is below 0 and crosses up the signal line, then this is a BUY signal! DOWN-TREND: If the MACD is above 0 and crosses down the signal line, then this is a SELL signal! How to trade this: First rule: Be consistent! Second rule: You will have lost trades and losing streaks - deal with it! First set the SL slightly below the last significant low (eventually add/subtract the ATR value to/from it) Then adjust the TP and ALWAYS use a RR ratio of 1.5. NEVER get out of the trade earlier Take every possible trade! Important: Money management is key... so be consistent! Have fun! :)
Индикатор Pine Script™
от mastixmc
4
STC w/ Zero Lag MACDSTC + Zero Lag MACD (includes regular MACD also) What I added here was two other variables The Schaff Trend Cycle working with Zero Lag Macd to give you double confirmation on your Higher Time Frame entries such as 4H, 6H, and Daily. You may also turn on regular MACD instead of Zero Lag, if you'd like. ***Red Dot for Bear ***Green Dot for Bull ***Higher Confirmation is: Red Dot + Red MACD for Bear Green Dot + Green MACD for Bull More confirmation to come! CHEERS If you would like to get in contact with me, please reach out to me via DM here, or Twitter. It's the best way to get in touch with me in regards to indicators, and market analysis. Enjoy! -RingoKid
Индикатор Pine Script™
от FloFiBots
3
ECG MACD Botok this is hybrid of ECG bot -and MACD in the ECG bot it combination of vwap and RSI here I use different combination that may be even better which is a regular MACD and the rsi ECG bot . you need to understand how this system work in order to make it best for you first theory- The ECG bot and this one base on simple but very strong idea which is there is differnt between repainted MTF to non repainted MTF So if you put the same MTF 1 security (repaint ) and MTF 2 security (non repaint ) then the difference between them is the repaint distance. so if i build model of buy force vs sell force on this diffrence. SInce security is so dominant in the repaint model it force the signal to be at certain time . but also doing so it calculate the buy and sell force of the privoius day . which is very powerfull signal. so puting to system of minus and plus the repaint model will produce signals. and due to security the strongest one will be when security finish it calculation at a specic time done by the MTF. so this is the "repaint signal" that make the repiant strategy to work so well. my system is just to dump the unwanted noise and to keep the repaint ones. so by this reduce true repaint to be mimimum. I hope you understand the idea . it not perfect but i thnk we are very close (i hope) The MACD is your source so you can change the fast and slow to what ever you wish the repaint system is conrol by the repaint control if you use 60 min it need to to be 60 or more then that . if you use 30 min candle then use 30 etc for each thing you do you must use the bar control to adjust it as you need to adjust the upper treshold of the buy and the sell for crypto this setting ok, you may change the lower treshold so use bar repaly to see where it was repaint and by that you can fix it for stocks use 1 week MTF on 4 hour candle , increase repiant control to 240 for forex it same as crypto but you need to adjust to any coin that you use. for further questions please let me know once this project prove it idea that it safe i will make study version . So do not put any 1 cent before you run all the test needed and live demo test to see how it work on real life I put lower treshold on -450, on alts change it o -400
Стратегия Pine Script™
от RafaelZioni
5
Elder-Keltner-Impulse-MA Study by STTAStudy Name: Elder-Keltner-Impulse-MA Study by STTA English: This indicator shows in a combined way three Keltner Channels with EMA21 and multiplier 1,3,5, the Elder Impulse System and a short EMA 11 to recognize the valuation zone, according to various strategies of Dr. Alexander Elder. This indicator can be applied on all symbols. Inputs: displayed symbol Settings: Elder Force Index (EFI) -EIF MACD Length -EIF MACD Slow Length -EIF MACD Signal Length -EIF EMA Length EMA Short Length Keltner Channels (KC) -KC MA Length -KC Multiplier1-3 -KC Source -KC Type -KC Bands Style Outputs: -EIF Bar Colors -KC Upper1-3 channel upper and lower Lines -MA Short
Индикатор Pine Script™
от Trading-Software-Consulting
1
Trade4Wealth Software-IITrade4wealth Software-II DESCRIPTION: This Alert indicator utilizes the Heiken Ashi with non-lag EMA was a scalping and intraday trading. There is also included filtering on MACD direction and trend direction as indicated by two MA: SMA (20) and EMA (50). The Heiken Ashi candles are great as price action trending indicator, they shows smooth strong and clear price fluctuations with price. Financial Markets: NSE/BSE/MCX > Optimised settings for 3 min, 5 min and 15 min Time Frame. Indicators used in calculations: > MACD 2 colour (5,9,3) > EMA, period 50 > SMA, period 20 > Non lag EMA , period 20 Generate Alerts use the following Trading Rules: > Heiken Ashi with non-lag dot > Trade only in direction of the trend. > UP trend : MA 20 period is above EMA 50 period. > Down trend : MA 20 period is below EMA 50 period. How to use: > Use software with Default Settings. For Buy : > If 20 SMA (i.e. Green Line) Crosses 50 EMA (i.e. Red Line) from lower to upper side than Buy. > Zone & Parabolic Sar both must be Green for Buy. For Sell : > If 20 SMA (i.e. Green Line) Crosses 50 EMA (i.e. Red Line) from upper to lower side than Sell. > Zone & Parabolic Sar both/ must be Red for Sell. HINTS: - Good positions occur when MACD crosses the Zero line. - Large Heikin Ashi candles with small wicks in direction of trend are good strong trends. How to get access: Please click on the link in the signature or send me a private message to get access.
Индикатор Pine Script™
от AMARMANDEKAR
4