Регистрация

Tools

AbdulLibraryLibrary "AbdulLibrary" The library consists of three sections: Technical Analysis Functions - A collection of tools commonly used by day traders Trading Setup Filters Functions - A number of filters that help day traders to screen trading signals Candlestick Pattern Detection Functions - To detect different candlestick patterns that are used in day trading setups Note that this would have been possible without the help of @ZenAndTheArtOfTrading as I build-up this library after completing his pine script mastery course so big thanks to him The content of the library are:- fibLevels(preDayClose, preDayHigh, preDayLow) Calculates Daily Pivot Point and Fibonacci Key Levels   Parameters:      preDayClose : The previous day candle close      preDayHigh : The previous day candle high      preDayLow : The previous day candle low   Returns: Returns Daily Pivot Point and Fibonacci Key Levels as a tuple bullishFib(canHigh, canLow, fibLevel) Calculates Fibonacci Levels in Bullish move   Parameters:      canHigh : The high of the move      canLow : The low of the move      fibLevel : The Fib level as % you want to calculate   Returns: Returns The Fib level for the Bullish move bearishFib(canHigh, canLow, fibLevel) Calculates Fibonacci Levels in Bearish move   Parameters:      canHigh : The high of the move      canLow : The low of the move      fibLevel : The Fib level as % you want to calculate   Returns: Returns The Fib level for the Bearish move getCandleSize() Calculates the size of candle (high - low) in points   Returns: Returns candle size in points getCandleBodySize() Calculates the size of candle (close - open) in points   Returns: Returns candle body size in points getHighWickSize() Calculates the high wick size of candle in points   Returns: Returns The high wick size of candle in points getLowWickSize() Calculates the low wick size of candle in points   Returns: Returns The low wick size of candle in points getBodyPercentage() Calculates the candle body size as % of overall candle size   Returns: Returns The candle body size as % of overall candle size isSwingHigh(period) Checks if the price has created new swing high over a period of time   Parameters:      period : The lookback time we want to check for swing high   Returns: Returns True if the current candle or the previous candle is a swing high isSwingLow(period) Checks if the price has created new swing low over a period of time   Parameters:      period : The lookback time we want to check for swing low   Returns: Returns True if the current candle or the previous candle is a swing low isDojiSwingHigh(period) Checks if a doji is a swing high over a period of time   Parameters:      period : The lookback time we want to check for swing high   Returns: Returns True if the doji is a swing high isDojiSwingLow(period) Checks if a doji is a swing low over a period of time   Parameters:      period : The lookback time we want to check for swing low   Returns: Returns True if the doji is a swing low isBigBody(atrFilter, atr, candleBodySize, multiplier) Checks if a candle has big body compared to ATR   Parameters:      atrFilter : Check if user wants to use ATR to filter candle-setup signals      atr : The ATR value to be used to compare candle body size      candleBodySize : The candle body size      multiplier : The multiplier to be used to compare candle body size   Returns: Returns Boolean true if the candle setup is big isSmallBody(atrFilter, atr, candleBodySize, multiplier) Checks if a candle has small body compared to ATR   Parameters:      atrFilter : Check if user wants to use ATR to filter candle-setup signals      atr : The ATR value to be used to compare candle body size      candleBodySize : The candle body size      multiplier : The multiplier to be used to compare candle body size   Returns: Returns Boolean true if the candle setup is small isHammer(fibLevel, colorMatch) Checks if a candle is a hammer based on user input parameters and candle conditions   Parameters:      fibLevel : Fib level to base candle body on      colorMatch : Checks if user needs for the candel to be green   Returns: Returns Boolean - True if the candle setup is hammer isShootingStar(fibLevel, colorMatch) Checks if a candle is a shooting star based on user input parameters and candle conditions   Parameters:      fibLevel : Fib level to base candle body on      colorMatch : Checks if user needs for the candel to be red   Returns: Returns Boolean - True if the candle setup is star isBullEngCan(allowance, period) Check if a candle is a bullish engulfing candle   Parameters:      allowance : How many points the candle open is allowed to be off (To allow for gaps)      period : The lookback period for swing low check   Returns: Boolean - True only if the candle is a bullish engulfing candle isBearEngCan(allowance, period) Check if a candle is a bearish engulfing candle   Parameters:      allowance : How many points the candle open is allowed to be off (To allow for gaps)      period : The lookback period for swing high check   Returns: Boolean - True only if the candle is a bearish engulfing candle isBullDoji(maxSize, wickLimit, colorFilter) Check if a candle is a bullish doji candle   Parameters:      maxSize : Maximum candle body size as % of total candle size to be considered as doji      wickLimit : Maximum wick size of one wick compared to the other wick      colorFilter : Checks if the doji is green   Returns: Boolean - True if the candle is a bullish doji isBearDoji(maxSize, wickLimit, colorFilter) Check if a candle is a bearish doji candle   Parameters:      maxSize : Maximum candle body size as % of total candle size to be considered as doji      wickLimit : Maximum wick size of one wick compared to the other wick      colorFilter : Checks if the doji is red   Returns: Boolean - True if the candle is a bearish doji isBullOutBar() Check if a candle is a bullish outside bar   Returns: Boolean - True if the candle is a bullish outside bar isInsideBar() Check if a candle is an inside bar   Returns: Returns Boolean - True if a candle is an inside bar
Библиотека Pine Script™
от Abdul_Saif
1
[e2] Drawing Library :: Horizontal Ray█ OVERVIEW Library "e2hray" A drawing library that contains the hray() function, which draws a horizontal ray/s with an initial point determined by a specified condition. It plots a ray until it reached the price. The function let you control the visibility of historical levels and setup the alerts. █ HORIZONTAL RAY FUNCTION hray(condition, level, color, extend, hist_lines, alert_message, alert_delay, style, hist_style, width, hist_width)   Parameters:      condition : Boolean condition that defines the initial point of a ray      level : Ray price level.      color : Ray color.      extend : (optional) Default value true, current ray levels extend to the right, if false - up to the current bar.      hist_lines : (optional) Default value true, shows historical ray levels that were revisited, default is dashed lines. To avoid alert problems set to 'false' before creating alerts.      alert_message : (optional) Default value string(na), if declared, enables alerts that fire when price revisits a line, using the text specified      alert_delay : (optional) Default value int(0), number of bars to validate the level. Alerts won't trigger if the ray is broken during the 'delay'.      style : (optional) Default value 'line.style_solid'. Ray line style.      hist_style : (optional) Default value 'line.style_dashed'. Historical ray line style.      width : (optional) Default value int(1), ray width in pixels.      hist_width : (optional) Default value int(1), historical ray width in pixels.   Returns: void █ EXAMPLES  • Example 1. Single horizontal ray from the dynamic input. //@version=5 indicator("hray() example :: Dynamic input ray", overlay = true) import e2e4mfck/e2hray/1 as e2draw inputTime = input.time(timestamp("20 Jul 2021 00:00 +0300"), "Date", confirm = true) inputPrice = input.price(54, 'Price Level', confirm = true) e2draw.hray(time == inputTime, inputPrice, color.blue, alert_message = 'Ray level re-test!') var label mark = label.new(inputTime, inputPrice, 'Selected point to start the ray', xloc.bar_time)  • Example 2. Multiple horizontal rays on the moving averages cross. //@version=5 indicator("hray() example :: MA Cross", overlay = true) import e2e4mfck/e2hray/1 as e2draw float sma1 = ta.​sma​(close, 20) float sma2 = ta.​sma​(close, 50) bullishCross = ta.crossover( sma1, sma2) bearishCross = ta.crossunder(sma1, sma2) plot(sma1, 'sma1', color.purple) plot(sma2, 'sma2', color.blue) // 1a. We can use 2 function calls to distinguish long and short sides. e2draw.hray(bullishCross, sma1, color.green, alert_message = 'Bullish Cross Level Broken!', alert_delay = 10) e2draw.hray(bearishCross, sma2, color.red, alert_message = 'Bearish Cross Level Broken!', alert_delay = 10) // 1b. Or a single call for both. // e2draw.hray(bullishCross or bearishCross, sma1, bullishCross ? color.green : color.red)  • Example 3. Horizontal ray at the all time highs with an alert. //@version=5 indicator("hray() example :: ATH", overlay = true) import e2e4mfck/e2hray/1 as e2draw var float ​ath​ = 0, ​ath​ := math.max(high, ​ath​) bool newAth = ta.change(​ath​) e2draw.hray(​nz​(newAth ), high , color.orange, alert_message = 'All Time Highs Tested!', alert_delay = 10)
Выбор редакции
Библиотека Pine Script™
от e2e4
17
ZenLibraryLibrary "ZenLibrary" A collection of custom tools & utility functions commonly used with my scripts. getDecimals() Calculates how many decimals are on the quote price of the current market   Returns: The current decimal places on the market quote price truncate(float, float) Truncates (cuts) excess decimal places   Parameters:      float : _number The number to truncate      float : _decimalPlaces (default=2) The number of decimal places to truncate to   Returns: The given _number truncated to the given _decimalPlaces toWhole(float) Converts pips into whole numbers   Parameters:      float : _number The pip number to convert into a whole number   Returns: The converted number toPips(float) Converts whole numbers back into pips   Parameters:      float : _number The whole number to convert into pips   Returns: The converted number av_getPositionSize(float, float, float, float) Calculates OANDA forex position size for AutoView based on the given parameters   Parameters:      float : _balance The account balance to use      float : _risk The risk percentage amount (as a whole number - eg. 1 = 1% risk)      float : _stopPoints The stop loss distance in POINTS (not pips)      float : _conversionRate The conversion rate of our account balance currency   Returns: The calculated position size (in units - only compatible with OANDA) getMA(int, string) Gets a Moving Average based on type   Parameters:      int : _length The MA period      string : _maType The type of MA   Returns: A moving average with the given parameters getEAP(float) Performs EAP stop loss size calculation (eg. ATR >= 20.0 and ATR < 30, returns 20)   Parameters:      float : _atr The given ATR to base the EAP SL calculation on   Returns: The EAP SL converted ATR size barsAboveMA(int, float) Counts how many candles are above the MA   Parameters:      int : _lookback The lookback period to look back over      float : _ma The moving average to check   Returns: The bar count of how many recent bars are above the MA barsBelowMA(int, float) Counts how many candles are below the MA   Parameters:      int : _lookback The lookback period to look back over      float : _ma The moving average to reference   Returns: The bar count of how many recent bars are below the EMA barsCrossedMA(int, float) Counts how many times the EMA was crossed recently   Parameters:      int : _lookback The lookback period to look back over      float : _ma The moving average to reference   Returns: The bar count of how many times price recently crossed the EMA getPullbackBarCount(int, int) Counts how many green & red bars have printed recently (ie. pullback count)   Parameters:      int : _lookback The lookback period to look back over      int : _direction The color of the bar to count (1 = Green, -1 = Red)   Returns: The bar count of how many candles have retraced over the given lookback & direction getBodySize() Gets the current candle's body size (in POINTS, divide by 10 to get pips)   Returns: The current candle's body size in POINTS getTopWickSize() Gets the current candle's top wick size (in POINTS, divide by 10 to get pips)   Returns: The current candle's top wick size in POINTS getBottomWickSize() Gets the current candle's bottom wick size (in POINTS, divide by 10 to get pips)   Returns: The current candle's bottom wick size in POINTS getBodyPercent() Gets the current candle's body size as a percentage of its entire size including its wicks   Returns: The current candle's body size percentage isHammer(float, bool) Checks if the current bar is a hammer candle based on the given parameters   Parameters:      float : _fib (default=0.382) The fib to base candle body on      bool : _colorMatch (default=false) Does the candle need to be green? (true/false)   Returns: A boolean - true if the current bar matches the requirements of a hammer candle isStar(float, bool) Checks if the current bar is a shooting star candle based on the given parameters   Parameters:      float : _fib (default=0.382) The fib to base candle body on      bool : _colorMatch (default=false) Does the candle need to be red? (true/false)   Returns: A boolean - true if the current bar matches the requirements of a shooting star candle isDoji(float, bool) Checks if the current bar is a doji candle based on the given parameters   Parameters:      float : _wickSize (default=2) The maximum top wick size compared to the bottom (and vice versa)      bool : _bodySize (default=0.05) The maximum body size as a percentage compared to the entire candle size   Returns: A boolean - true if the current bar matches the requirements of a doji candle isBullishEC(float, float, bool) Checks if the current bar is a bullish engulfing candle   Parameters:      float : _allowance (default=0) How many POINTS to allow the open to be off by (useful for markets with micro gaps)      float : _rejectionWickSize (default=disabled) The maximum rejection wick size compared to the body as a percentage      bool : _engulfWick (default=false) Does the engulfing candle require the wick to be engulfed as well?   Returns: A boolean - true if the current bar matches the requirements of a bullish engulfing candle isBearishEC(float, float, bool) Checks if the current bar is a bearish engulfing candle   Parameters:      float : _allowance (default=0) How many POINTS to allow the open to be off by (useful for markets with micro gaps)      float : _rejectionWickSize (default=disabled) The maximum rejection wick size compared to the body as a percentage      bool : _engulfWick (default=false) Does the engulfing candle require the wick to be engulfed as well?   Returns: A boolean - true if the current bar matches the requirements of a bearish engulfing candle timeFilter(string, bool) Determines if the current price bar falls inside the specified session   Parameters:      string : _sess The session to check      bool : _useFilter (default=false) Whether or not to actually use this filter   Returns: A boolean - true if the current bar falls within the given time session dateFilter(int, int) Determines if this bar's time falls within date filter range   Parameters:      int : _startTime The UNIX date timestamp to begin searching from      int : _endTime the UNIX date timestamp to stop searching from   Returns: A boolean - true if the current bar falls within the given dates dayFilter(bool, bool, bool, bool, bool, bool, bool) Checks if the current bar's day is in the list of given days to analyze   Parameters:      bool : _monday Should the script analyze this day? (true/false)      bool : _tuesday Should the script analyze this day? (true/false)      bool : _wednesday Should the script analyze this day? (true/false)      bool : _thursday Should the script analyze this day? (true/false)      bool : _friday Should the script analyze this day? (true/false)      bool : _saturday Should the script analyze this day? (true/false)      bool : _sunday Should the script analyze this day? (true/false)   Returns: A boolean - true if the current bar's day is one of the given days atrFilter(float, float) Checks the current bar's size against the given ATR and max size   Parameters:      float : _atr (default=ATR 14 period) The given ATR to check      float : _maxSize The maximum ATR multiplier of the current candle   Returns: A boolean - true if the current bar's size is less than or equal to _atr x _maxSize fillCell(table, int, int, string, string, color, color) This updates the given table's cell with the given values   Parameters:      table : _table The table ID to update      int : _column The column to update      int : _row The row to update      string : _title The title of this cell      string : _value The value of this cell      color : _bgcolor The background color of this cell      color : _txtcolor The text color of this cell   Returns: A boolean - true if the current bar falls within the given dates
Библиотека Pine Script™
от ZenAndTheArtOfTrading
30