Ichimoku Cloud Strategy with Exits
- Buy Signal
- Sell Signal
- Long Exit Signal
- Short Exit Signal
Candlestick analysis
Fair Value Gap [by Oberlunar]Fair Value Gap
This indicator is designed to identify and display Fair Value Gaps (FVG) on the price chart. Fair Value Gaps are areas between candles where the price lacks continuity, leaving a "gap" that can serve as a reference point for price retracements. These zones are often considered important by traders as they represent market imbalances that tend to be "mitigated" (i.e., filled or tested) over time.
Purpose of Publication
This indicator addresses a common gap in FVG indicators. Most existing FVG indicators do not visually distinguish between mitigated (touched) FVGs and those that remain intact. With this indicator:
Mitigated FVGs are clearly displayed with distinct colors, allowing traders to identify which zones have been partially or fully filled by the price.
Unmitigated FVGs remain prominent, representing potential points of interest.
Key Features
Identification of Fair Value Gaps:
A Bullish FVG (upward gap) forms when the high of the three previous candles (candle -3) is lower than the low of the next candle (candle -1).
A Bearish FVG (downward gap) forms when the low of the three previous candles (candle -3) is higher than the high of the next candle (candle -1).
Dynamic Coloring:
Unmitigated FVGs are highlighted with specific colors: green for Bullish and red for Bearish gaps.
When an FVG is "touched" by the price (i.e., mitigated), the color changes:
Yellow-green for mitigated Bullish FVGs.
Purple for mitigated Bearish FVGs.
Handling Mitigated FVGs:
When an FVG is touched by the price, it is visually updated with a different color.
An option can be enabled to "shrink" the mitigated zone, adjusting the box to reflect the remaining untested portion of the gap.
Customization:
Configure the maximum number of FVGs to display on the chart.
Set specific colors for mitigated and unmitigated FVGs.
Choose whether to automatically shrink mitigated zones.
How to Identify Support and Resistance Levels
Support:
Bullish FVGs represent potential support levels, as they indicate areas where the price might return to seek liquidity or fill the imbalance.
An FVG that is repeatedly touched without being fully filled becomes a significant support zone.
Resistance:
Bearish FVGs represent potential resistance levels, indicating zones where the price might stall or reverse direction.
Why a Repeatedly Mitigated FVG is Significant
When an FVG is touched or mitigated multiple times, it means the market recognizes that area as significant. This can happen for several reasons:
Accumulation or Distribution: Institutional traders may use these zones to accumulate or distribute positions without causing excessive market movement.
Presence of Liquidity: FVGs often represent areas with pending orders (stop-losses, limit orders), and the price revisits these zones to seek liquidity.
Market Equilibrium: When an FVG is repeatedly filled, it indicates the market's attempt to balance a demand-supply imbalance. This makes the zone an important level to monitor for potential breakouts or reversals.
Estrategia Mejorada con EMAs
Estrategia Mejorada con EMAs
Este indicador está diseñado para identificar tendencias claras y generar señales de entrada y salida en operaciones de compra (CALL) y venta (PUT) basadas en la alineación de medias móviles exponenciales (EMAs). Incluye niveles de Take Profit (TP1, TP2, TP3) y Stop Loss (SL) calculados dinámicamente utilizando el ATR, así como alertas personalizables.
Características principales:
- **Identificación de tendencias:** Alineación de las EMAs 13, 48 y 200 para detectar tendencias alcistas o bajistas.
- **Validación de volumen:** Verificación de volumen por encima del promedio para confirmar la fortaleza de las señales.
- **Ruptura de niveles clave:** Detección de rupturas del máximo/mínimo del día anterior y del premercado.
- **Gestión de riesgos:** Niveles de TP y SL configurables con multiplicadores basados en ATR.
- **Visualización clara:** Iconos en el gráfico para señales de entrada, salida, TP y SL.
- **Alertas:** Notificaciones para nuevas señales, niveles alcanzados de TP y activación de SL.
5 EMA / 20 EMA Crossover Strategy5 EMA / 20 EMA Crossover Strategy
shortEMA: The 5-period EMA.
longEMA: The 20-period EMA.
ta.crossover(ema5, ema20): This function checks if the 5-period EMA crosses above the 20-period EMA, generating a buy signal.
ta.crossunder(ema5, ema20): This function checks if the 5-period EMA crosses below the 20-period EMA, generating a sell signal.
strategy.entry("Buy", strategy.long): This function enters a long position when a buy signal is triggered.
strategy.close("Buy"): This closes the long position when a sell signal is triggered.
The strategy also includes visual markers (plotshape) to highlight buy and sell signals on the chart with labels "BUY" and "SELL."
am27scalper scalpingsimple ema scalping stratagy where when 5 ama cross above 10 ema than it gives buy signal and when 5 ema cross below 10 ema than it gives sell signal
EMA X OverA straightforward indicator that plots two exponential moving averages (EMAs). Upon a crossover between the two EMAs, the chart will display a marker.
Furthermore, when the price closes above or below the long EMA, the chart will also indicate this occurrence with a marker.
3 Candle stick 1 hour rule It indicates Context of the Market, it applicable in 1 hour time frame only.
Weekly-SeparatorThis TradingView indicator draws vertical lines at the weekly open, providing a visual reference for the start of the trading week. These lines help traders identify key price levels and track market movements relative to the opening price of each week.
Simple y bien// © GainzAlgo
//@version=5
indicator('GainzAlgo Pro', overlay=true, max_labels_count=500)
candle_stability_index_param = input.float(0.5, 'Candle Stability Index', 0, 1, step=0.1, group='Technical', tooltip='Candle Stability Index measures the ratio between the body and the wicks of a candle. Higher - more stable.')
rsi_index_param = input.int(50, 'RSI Index', 0, 100, group='Technical', tooltip='RSI Index measures how overbought/oversold is the market. Higher - more overbought/oversold.')
candle_delta_length_param = input.int(5, 'Candle Delta Length', 3, group='Technical', tooltip='Candle Delta Length measures the period over how many candles the price increased/decreased. Higher - longer period.')
disable_repeating_signals_param = input.bool(false, 'Disable Repeating Signals', group='Technical', tooltip='Removes repeating signals. Useful for removing clusters of signals and general clarity')
GREEN = color.rgb(29, 255, 40)
RED = color.rgb(255, 0, 0)
TRANSPARENT = color.rgb(0, 0, 0, 100)
label_size = input.string('normal', 'Label Size', options= , group='Cosmetic')
label_style = input.string('text bubble', 'Label Style', , group='Cosmetic')
buy_label_color = input(GREEN, 'BUY Label Color', inline='Highlight', group='Cosmetic')
sell_label_color = input(RED, 'SELL Label Color', inline='Highlight', group='Cosmetic')
label_text_color = input(color.white, 'Label Text Color', inline='Highlight', group='Cosmetic')
stable_candle = math.abs(close - open) / ta.tr > candle_stability_index_param
rsi = ta.rsi(close, 14)
bullish_engulfing = close < open and close > open and close > open
rsi_below = rsi < rsi_index_param
decrease_over = close < close
bull = bullish_engulfing and stable_candle and rsi_below and decrease_over and barstate.isconfirmed
else if label_style == 'triangle'
label.new(bull ? bar_index : na, low, 'BUY', yloc=yloc.belowbar, color=buy_label_color, style=label.style_triangleup, textcolor=TRANSPARENT, size=label_size)
else if label_style == 'arrow'
label.new(bull ? bar_index : na, low, 'BUY', yloc=yloc.belowbar, color=buy_label_color, style=label.style_arrowup, textcolor=TRANSPARENT, size=label_size)
last_signal := 'buy'
if bear and (disable_repeating_signals_param ? (last_signal != 'sell' ? true : na) : true)
if label_style == 'text bubble'
label.new(bear ? bar_index : na, high, 'SELL', color=sell_label_color, style=label.style_label_down, textcolor=label_text_color, size=label_size)
else if label_style == 'triangle'
label.new(bear ? bar_index : na, high, 'SELL', yloc=yloc.abovebar, color=sell_label_color, style=label.style_triangledown, textcolor=TRANSPARENT, size=label_size)
else if label_style == 'arrow'
label.new(bear ? bar_index : na, high, 'SELL', yloc=yloc.abovebar, color=sell_label_color, style=label.style_arrowdown, textcolor=TRANSPARENT, size=label_size)
last_signal := 'sell'
alertcondition(bull, 'BUY Signals', 'New signal: BUY')
alertcondition(bear, 'SELL Signals', 'New signal: SELL')
Simple y bien// © GainzAlgo
//@version=5
indicator('GainzAlgo Pro', overlay=true, max_labels_count=500)
candle_stability_index_param = input.float(0.5, 'Candle Stability Index', 0, 1, step=0.1, group='Technical', tooltip='Candle Stability Index measures the ratio between the body and the wicks of a candle. Higher - more stable.')
rsi_index_param = input.int(50, 'RSI Index', 0, 100, group='Technical', tooltip='RSI Index measures how overbought/oversold is the market. Higher - more overbought/oversold.')
candle_delta_length_param = input.int(5, 'Candle Delta Length', 3, group='Technical', tooltip='Candle Delta Length measures the period over how many candles the price increased/decreased. Higher - longer period.')
disable_repeating_signals_param = input.bool(false, 'Disable Repeating Signals', group='Technical', tooltip='Removes repeating signals. Useful for removing clusters of signals and general clarity')
GREEN = color.rgb(29, 255, 40)
RED = color.rgb(255, 0, 0)
TRANSPARENT = color.rgb(0, 0, 0, 100)
label_size = input.string('normal', 'Label Size', options= , group='Cosmetic')
label_style = input.string('text bubble', 'Label Style', , group='Cosmetic')
buy_label_color = input(GREEN, 'BUY Label Color', inline='Highlight', group='Cosmetic')
sell_label_color = input(RED, 'SELL Label Color', inline='Highlight', group='Cosmetic')
label_text_color = input(color.white, 'Label Text Color', inline='Highlight', group='Cosmetic')
stable_candle = math.abs(close - open) / ta.tr > candle_stability_index_param
rsi = ta.rsi(close, 14)
bullish_engulfing = close < open and close > open and close > open
rsi_below = rsi < rsi_index_param
decrease_over = close < close
bull = bullish_engulfing and stable_candle and rsi_below and decrease_over and barstate.isconfirmed
else if label_style == 'triangle'
label.new(bull ? bar_index : na, low, 'BUY', yloc=yloc.belowbar, color=buy_label_color, style=label.style_triangleup, textcolor=TRANSPARENT, size=label_size)
else if label_style == 'arrow'
label.new(bull ? bar_index : na, low, 'BUY', yloc=yloc.belowbar, color=buy_label_color, style=label.style_arrowup, textcolor=TRANSPARENT, size=label_size)
last_signal := 'buy'
if bear and (disable_repeating_signals_param ? (last_signal != 'sell' ? true : na) : true)
if label_style == 'text bubble'
label.new(bear ? bar_index : na, high, 'SELL', color=sell_label_color, style=label.style_label_down, textcolor=label_text_color, size=label_size)
else if label_style == 'triangle'
label.new(bear ? bar_index : na, high, 'SELL', yloc=yloc.abovebar, color=sell_label_color, style=label.style_triangledown, textcolor=TRANSPARENT, size=label_size)
else if label_style == 'arrow'
label.new(bear ? bar_index : na, high, 'SELL', yloc=yloc.abovebar, color=sell_label_color, style=label.style_arrowdown, textcolor=TRANSPARENT, size=label_size)
last_signal := 'sell'
alertcondition(bull, 'BUY Signals', 'New signal: BUY')
alertcondition(bear, 'SELL Signals', 'New signal: SELL')
Direnç Destek noktaları tahminleriOlası direnç ve destek noktalarını bir önceki günün açılış, kapanış, high ve low değerlerine göre tahminlemeye çalışıp grafik üzerinde gösteren kod dosyası.
Multiple Swing High/Low with SLExplanation:
Swing Highs and Lows:
The script detects swing highs and swing lows using ta.pivothigh() and ta.pivotlow() on a 3-minute basis.
Each swing high is drawn with a green line, and each swing low is drawn with a red line.
Stop-Loss (SL) Lines:
For each swing high, a stop-loss line is drawn 15 points below the swing high.
For each swing low, a stop-loss line is drawn 15 points above the swing low.
The SL line for swing highs is drawn in red, and the SL line for swing lows is drawn in blue.
Labels for Swing High/Low and SL:
Labels with text like "Swing High" or "Swing Low" are added at the swing points, and SL labels are added at the stop-loss levels.
These labels can be toggled on/off using the showSwingTags input.
Line Extension:
The line.set_x2() function ensures that the swing lines and SL lines are extended to the current bar as price moves.
Key Changes:
Removed Arrays: Instead of using arrays to store lines and labels, we now handle each line and label individually. This avoids the issue where complex types (line and label) were being stored in arrays, which Pine Script doesn't support directly.
Dynamic Creation: New lines and labels are dynamically created as new swings occur, and they stay on the chart until the script is removed or the chart is reloaded.
Multiple Swing High/Low with SLExplanation:
Swing Highs and Lows:
The script detects swing highs and swing lows using ta.pivothigh() and ta.pivotlow() on a 3-minute basis.
Each swing high is drawn with a green line, and each swing low is drawn with a red line.
Stop-Loss (SL) Lines:
For each swing high, a stop-loss line is drawn 15 points below the swing high.
For each swing low, a stop-loss line is drawn 15 points above the swing low.
The SL line for swing highs is drawn in red, and the SL line for swing lows is drawn in blue.
Labels for Swing High/Low and SL:
Labels with text like "Swing High" or "Swing Low" are added at the swing points, and SL labels are added at the stop-loss levels.
These labels can be toggled on/off using the showSwingTags input.
Line Extension:
The line.set_x2() function ensures that the swing lines and SL lines are extended to the current bar as price moves.
Key Changes:
Removed Arrays: Instead of using arrays to store lines and labels, we now handle each line and label individually. This avoids the issue where complex types (line and label) were being stored in arrays, which Pine Script doesn't support directly.
Dynamic Creation: New lines and labels are dynamically created as new swings occur, and they stay on the chart until the script is removed or the chart is reloaded.
ENIGMA ENDGAME with Dynamic Trend-Based FibonacciOverview:
The *ENIGMA ENDGAME with Dynamic Trend-Based Fibonacci* indicator is designed for traders seeking precision in identifying high-probability trade opportunities based on dynamic Fibonacci retracement levels. By combining trend analysis, Fibonacci filtering, and session-based logic, this indicator provides actionable buy and sell signals with a strong foundation in technical analysis.
Features:
1. **Dynamic Trend-Based Fibonacci Levels:**
- Automatically calculates Fibonacci retracement levels based on the current market trend (uptrend or downtrend).
- Levels dynamically adjust to the latest swing high/low, providing an evolving view of key price areas.
2. **Customizable Fibonacci Levels:**
- Configure up to four Fibonacci levels (e.g., 50%, 61.8%, 72%, 99%) to tailor the indicator to your trading strategy.
- Default levels are pre-set but can be adjusted for unique market approaches.
3. **Kill Zones for Session Filtering:**
- Filters trades based on predefined trading sessions (London and US).
- Easily configurable to match your trading hours or preferences.
4. **Buy and Sell Signals:**
- **Buy Signals**: Triggered during uptrends when the price pulls back to Fibonacci support levels.
- **Sell Signals**: Triggered during downtrends when the price retraces to Fibonacci resistance levels.
- Signal shapes (green triangles for buys, red triangles for sells) make them visually clear on the chart.
5. **Customizable Historical Signals:**
- Control how many past signals are displayed to maintain a clean chart while tracking historical performance.
6. **Alerts for Trade Opportunities:**
- Alerts for buy and sell signals allow traders to stay informed even when away from the screen.
How to Use:
1. **Trend-Based Fibonacci Analysis:**
- Enable the indicator on any instrument and timeframe.
- Monitor the Fibonacci levels dynamically calculated based on the most recent market trend (uptrend/downtrend).
2. **Kill Zones for Sessions:**
- Adjust the London and US session times under the **Inputs** tab to match your trading style.
- Signals outside these sessions are filtered, reducing noise during low-liquidity periods.
3. **Fibonacci Level Configuration:**
- Modify the Fibonacci retracement levels (e.g., 50%, 61.8%, etc.) under **Inputs** to fit your specific strategy.
- Ensure levels align with your desired retracement/resistance zones for trades.
4. **Buy/Sell Signal Confirmation:**
- Look for buy signals (green triangles) during uptrends when the price retraces to dynamic Fibonacci support levels.
- Look for sell signals (red triangles) during downtrends when the price retraces to dynamic Fibonacci resistance levels.
5. Alerts:
- Configure alerts under **TradingView Alerts** to be notified of buy or sell opportunities in real time.
Inputs and Default Settings:
- **Kill Zones:**
- London Start Hour: 1 UTC
- London End Hour: 23 UTC
- US Start Hour: 8 UTC
- US End Hour: 23 UTC
- **Swing Lookback Period:** 6
- **Fibonacci Levels:**
- Level 1: 50% (default)
- Level 2: 61.8% (default)
- Level 3: 72% (default)
- Level 4: 99% (default)
- **Maximum Historical Signals:** 30
- **Lookback Periods for Confirmation:**
- Minimum: 3
- Maximum: 18
Best Practices:
- Use this indicator in combination with price action or other tools to confirm trade setups.
- Ensure your Fibonacci levels align with known key levels on higher timeframes for increased accuracy.
- Monitor session activity using the kill zones to avoid trades during low-volume periods.
JerrySmart EMA AlgoThis strategy i hope to use it long term and make me money. It is used based on ema and volume it was created using AI i do not know if it will work but it looks promising. Lets see what happens
MFS-3 Bars Pattern Strategy3 Bar Pattern Strategy
Detects an Ignite Candle followed by a Pullback Candle followed by a Confirmation Candle.
A Box will be drawn around the setup and three arrows will identify I, P, C (Ignite, Pullback, Confirmation) the setup.
The strategy will calculate a Stop Loss below the Low Price of the Ignite candle and a Take Profit at 2 times the Stop Loss giving a Risk to Reward Ratio of 1:2.
Extra conditions are included to reduce false triggers:
- A down trend must be detected using 3 SMA (Long, Medium, Short) that should be aligned from Long to Short one above the other.
- The Ignite Candle's body must be BELOW the Short SMA
An input form is available to adjust some strategy parameters.
Performance Note
----------------------
Trading conditions are very strict, so most of the time, no signals will be detected in the Strategy window.
This strategy should only be one of many strategies used for trade setups.
Hope you enjoy it.
Intrabar BoxPlotThe Intrabar BoxPlot publication highlights an uncommon technique by displaying statistical intrabar Lower Timeframe (LTF) values on the chart.
🔶 USAGE
🔹 Middle 50% Boxes
By showing the middle 50% intrabar values through a box, we can more easily see where the intrabar activity is mainly situated.
The middle 50% intrabar values are referred to from here on as Interquartile range (IQR).
In this example, the successive IQRs form a channel where the price eventually breaks out.
Disproportionately distributed values can give insights which can be used to find potential support/resistance areas.
IQR gaps can give valuable information as well. Potentially, the price can return to these gaps.
Seeing the IQR areas against regular candles gives an alternative image of the underlying price movements.
🔹 Highest volume Price level
The script displays the price level with the highest volume situated, dependable on the user's source setting. Setting the source at 'close' will only display intrabar close values; the same goes for high, low, ...
As seen in the above example, the volume levels can aid in finding support/resistance.
🔹 Median
The location of the median off all intrabar values is displayed as a coloured dot: green when the close price is higher than the opening price and red if otherwise. The median can give valuable insights into price movements.
🔹 Outliers
Medium (white dots) and extreme (white X) outliers, in combination with the IQR box, can help identify potential areas of interest.
🔹 Volume Delta
When there is a discrepancy between the delta volume and direction of the candle, this will be displayed as follows:
Green candle: when the sum of the volume of red intrabars is higher than the sum of the volume of green intrabars, the candle will be coloured orange.
Red candle: when the sum of the volume of green intrabars is higher than the sum of the volume of red intrabars, the candle will be coloured blue.
🔹 Highlight Boxplot only
Probably the easiest way to display boxplot only is by changing the Bar's style to Bars .
🔶 DETAILS
All intrabar values (Lower TimeFrame - LTF) are sorted and evaluated. Values can be close , high , low , ... by selecting this in Settings ( source ).
The middle 50% of all values are displayed as a box; this contains the values between percentile 25 (p25) and percentile 75 (p75). The value of percentile rank 75 means 75% of all values are lower. The value of percentile rank 25 means 25% of all values are lower, or 75% is higher.
The difference between p75 and p25 is also known as Interquartile range (IQR)
IQR is used to check for outliers.
Wiki: Boxplot , Interquartile range
Extreme high: maximum value, higher than p75 + IQR*3
Max outlier high: maximum value, higher than p75 + IQR*1.5 but lower than p75 + IQR*3
Max: maximum value, lower than p75 + IQR*1.5
Min: minimum value, higher than p25 - IQR*1.5
Min outlier low: minimum value, lower than p25 - IQR*1.5 but higher than p25 - IQR*3
Extreme low: minimum value, lower than p25 - IQR*3
Max and min must not be interpreted with the current candle high/low.
🔹 Example: Length of chart-puppets
The following example can make it easier to digest. Forty "chart-puppets" are sorted by their length.
The p25 value is 97
The p50 value is 120
The p75 value is 149
75% of all "chart-puppets" are smaller than p75, and 25% is larger than p75.
50% of all "chart-puppets" are smaller than p50, and 50% is larger than p50 (= median).
25% of all "chart-puppets" are smaller than p25, and 75% is larger than p25.
IQR = 149 - 97 = 52
Extreme outlier limit max: p75 + IQR*3 = 149 + 52*3 = 305
Mild outlier limit max: p75 + IQR*1.5 = 149 + 52*1.5 = 227
Mild outlier limit min: p25 - IQR*1.5 = 97 - 52*1.5 = 19
Extreme outlier limit min: p25 - IQR*3 = 97 - 52*3 = -59
In this example there are no outliers to be found, all values are located between p25 - IQR*1.5 (19) and p75 + IQR*1.5. (227)
🔹 Source settings
Note that results are dependable on the chosen source (settings). When, for example, close is chosen as the source, only intrabar close prices are included. This means a low or high can stretch further then the min or max.
Here we can see different results with different source settings
🔹 LTF settings
When 'Auto' is enabled (Settings, LTF), the LTF will be the nearest possible x times smaller TF than the current TF. When 'Premium' is disabled, the minimum TF will always be 1 minute to ensure TradingView plans lower than Premium don't get an error.
Examples with current Daily TF (when Premium is enabled):
500 : 3 minute LTF
1500 (default): 1 minute LTF
5000: 30 seconds LTF (1 minute if Premium is disabled)
🔶 SETTINGS
Source: Set source at close, high, low,...
🔹 LTF
LTF: LTF setting
Auto + multiple: Adjusts the initial set LTF
Premium: Enable when your TradingView plan is Premium or higher
🔹 Intrabar Delta : Colors, dependable on different circumstances.
Up: Price goes up, with more bullish than bearish intrabar volume.
Up-: Price goes up, with more bearish than bullish intrabar volume.
Down: Price goes down, with more bearish than bullish intrabar volume.
Down+: Price goes down, with more bullish than bearish intrabar volume.
🔹 Table
Show table: Show details at the top right corner
Show TF: Show LTF at the bottom right corner
Text color/table size
See DETAILS for more information
Volume Delta Candles HTF [TradingFinder] LTF Volume Candles 🔵 Introduction
In financial markets, understanding the concepts of supply and demand and their impact on price movements is of paramount importance. Supply and demand, as fundamental pillars of economics, reflect the interaction between buyers and sellers.
When buyers' strength surpasses that of sellers, demand increases, and prices tend to rise. Conversely, when sellers dominate buyers, supply overtakes demand, causing prices to drop. These interactions play a crucial role in determining market trends, price reversal points, and trading decisions.
Volume Delta Candles offer traders a practical way to visualize trading activity within each candlestick. By integrating data from lower timeframes or live market feeds, these candles eliminate the need for standalone volume indicators.
They present the proportions of buying and selling volume as intuitive colored bars, making it easier to interpret market dynamics at a glance. Additionally, they encapsulate critical metrics like peak delta, lowest delta, and net delta, allowing traders to grasp the market's internal order flow with greater precision.
In financial markets, grasping the interplay between supply and demand and its influence on price movements is crucial for successful trading. These fundamental economic forces reflect the ongoing balance between buyers and sellers in the market.
When buyers exert greater strength than sellers, demand dominates, driving prices upward. Conversely, when sellers take control, supply surpasses demand, and prices decline. Understanding these dynamics is essential for identifying market trends, pinpointing reversal points, and making informed trading decisions.
Volume Delta Candles provide an innovative method for evaluating trading activity within individual candlesticks, offering a simplified view without relying on separate volume indicators. By leveraging lower timeframe or real-time data, this tool visualizes the distribution of buying and selling volumes within a candle through color-coded bars.
This visual representation enables traders to quickly assess market sentiment and understand the forces driving price action. Buyer and seller strength is a critical concept that focuses on the ratio of buying to selling volumes. This ratio not only provides insights into the market's current state but also serves as a leading indicator for detecting potential shifts in trends.
Traders often rely on volume analysis to identify significant supply and demand zones, guiding their entry and exit strategies. Delta Candles translate these complex metrics, such as Maximum Delta, Minimum Delta, and Final Delta, into an easy-to-read visual format using Japanese candlestick structures, making them an invaluable resource for analyzing order flows and market momentum.
By merging the principles of supply and demand with comprehensive volume analysis, tools like the indicator introduced here offer unparalleled clarity into market behavior. This indicator calculates the relative strength of supply and demand for each candlestick by analyzing the ratio of buyers to sellers.
🔵 How to Use
The presented indicator is a powerful tool for analyzing supply and demand strength in financial markets. It helps traders identify the strengths and weaknesses of buyers and sellers and utilize this information for better decision-making.
🟣 Analyzing the Highest Volume Trades on Candles
A unique feature of this indicator is the visualization of price levels with the highest trade volume for each candlestick. These levels are marked as black lines on the candles, indicating prices where most trades occurred. This information is invaluable for identifying key supply and demand zones, which often act as support or resistance levels.
🟣 Trend Confirmation
The indicator enables traders to confirm bullish or bearish trends by observing changes in buyer and seller strength. When buyer strength increases and demand surpasses supply, the likelihood of a bullish trend continuation grows. Conversely, decreasing buyer strength and increasing seller strength may signal a potential bearish trend reversal.
🟣 Adjusting Timeframes and Calculation Methods
Users can customize the indicator's candlestick timeframe to align with their trading strategy. Additionally, they can switch between moving average and current candle modes to achieve more precise market analysis.
This indicator, with its accurate and visual data display, is a practical and reliable tool for market analysts and traders. Using it can help traders make better decisions and identify optimal entry and exit points.
🔵 Settings
Lower Time Frame Volume : This setting determines which timeframe the indicator should use to identify the price levels with the highest trade volume. These levels, displayed as black lines on the candlesticks, indicate prices where the most trades occurred.
It is recommended that users align this timeframe with their primary chart’s timeframe.
As a general rule :
If the main chart’s timeframe is low (e.g., 1-minute or 5-minute), it is better to keep this setting at a similarly low timeframe.
As the main chart’s timeframe increases (e.g., daily or weekly), it is advisable to set this parameter to a higher timeframe for more aligned data analysis.
Cumulative Mode :
Current Candle : Strength is calculated only for the current candlestick.
EMA (Exponential Moving Average) : The strength is calculated using an exponential moving average, suitable for identifying longer-term trends.
Calculation Period : The default period for the exponential moving average (EMA) is set to 21. Users can modify this value for more precise analysis based on their specific requirements.
Ultra Data : This option enables users to view more detailed data from various market sources, such as Forex, Crypto, or Stocks. When activated, the indicator aggregates and displays volume data from multiple sources.
🟣 Table Settings
Show Info Table : This option determines whether the information table is displayed on the chart. When enabled, the table appears in a corner of the chart and provides details about the strength of buyers and sellers.
Table Size : Users can adjust the size of the text within the table to improve readability.
Table Position : This setting defines the table’s placement on the chart.
🔵 Conclusion
The indicator introduced in this article is designed as an advanced tool for analyzing supply and demand dynamics in financial markets. By leveraging buyer and seller strength ratios and visually highlighting price levels with the highest trade volume, it aids traders in identifying key market zones.
Key features, such as adjustable analysis timeframes, customizable calculation methods, and precise volume data display, allow users to tailor their analyses to market conditions.
This indicator is invaluable for analyzing support and resistance levels derived from trade volumes, enabling traders to make more accurate decisions about entering or exiting trades.
By utilizing real market data and displaying the highest trade volume lines directly on the chart, it provides a precise perspective on market behavior. These features make it suitable for both novice and professional traders aiming to enhance their analysis and trading strategies.
With this indicator, traders can gain a better understanding of supply and demand dynamics and operate more intelligently in financial markets. By combining volume data with visual analysis, this tool provides a solid foundation for effective decision-making and improved trading performance. Choosing this indicator is a significant step toward refining analysis and achieving success in complex financial markets.
Support and Resistance TrendlinesStrategy:
Support: Identified as the lowest low over a specific period.
Resistance: Identified as the highest high over a specific period.
Dynamic Trendlines: We’ll use the concept of a rolling window to calculate the highest highs and lowest lows over the last n bars (you can adjust the number of bars for more sensitivity).
Explanation:
Lookback Period (length): The number of bars over which we calculate the support and resistance levels. You can adjust this value depending on the timeframe and the sensitivity you want for the trendlines.
Resistance: This is the highest high over the length of bars. We use ta.highest(high, length) to find the highest high within the specified lookback period.
Support: This is the lowest low over the length of bars. We use ta.lowest(low, length) to find the lowest low within the specified lookback period.
Plotting the Lines:
We plot the support and resistance as horizontal lines on the chart using plot().
Additionally, we create dynamic trendlines that update automatically with each new bar. The line.new function creates lines that can be modified dynamically as new price data comes in.
Line Persistence:
The line functions are used to create horizontal lines that persist across bars. The trendlines adjust their position as the bars move forward.
How It Works:
This indicator will automatically detect the highest and lowest prices over the last n bars and draw support (green line) and resistance (red line) levels on the chart.
The trendlines will adjust as the market evolves and provide visual reference points for potential areas of price reversal.
How to Use This Script:
Copy and paste the Pine Script code into the Pine Script Editor on TradingView.
Save the script, and then add it to your chart.
Adjust the Lookback Period input to suit your trading strategy and timeframe.
The support and resistance levels will be drawn dynamically, and the lines will update as new bars form.
Customizations:
You can modify the number of bars (length) used to calculate support and resistance, depending on the timeframes you're interested in.
If you need more advanced trendline drawing (such as drawing trendlines between significant high/low points or automatic adjustment to more complex patterns), you might need to implement more advanced logic using peaks and valleys or price action patterns.
Let me know if you need any further adjustments!
Alert Kabi Family Unlimited Alarm indicator for any time frame and any type of currency, stock and index
اندییکاتور آلارم نامحدود برای هر تایم فریم و هر شاخص و ارز و سهام
Settings :
1- Before starting, clear all alarms in the trading view alarm section
2- Specify your alarm areas and currency pairs in the indicator settings section
3- Go to the trading view alarm section, click create alert, select the name of the indicator and click OK
4- Good Luck
T e L : @Ar3781
1- قبل از شروع تمام آلارم های تریدینگ ویو را پاک کنید
2- در قسمت تنظیمات اندیکاتور نواحی آلارم و جفت ارز خود را مشخص کنید
3- به قسمت الارم تریدینگ ویو رفته ایجاد هشدار را زده و اسم اندیکاتور را انتخاب کنید و اوکی کنید
4- مـــــــوفق بــــــاشـید
Percent Movement HighlighterThe Percent Movement Highlighter is a custom TradingView indicator that visually highlights candles based on their percentage movement relative to the previous day's close. The indicator uses two user-defined thresholds:
Positive Threshold: Marks candles that move up by a specified percentage or more.
Negative Threshold: Marks candles that move down by a specified percentage or more.
Features:
Visual Highlights:
Green candles for upward moves exceeding the positive threshold.
Red candles for downward moves exceeding the negative threshold.
Dynamic Counters:
Displays a summary label that counts the number of positive, negative, and neutral candles dynamically as the chart progresses.
User Inputs:
Customizable positive and negative percentage thresholds to suit different trading strategies.
This tool is useful for traders seeking to identify significant price movements and analyze market volatility efficiently.
