Cost of SpreadAdd to a quote, set the current total transaction cost (i.e. Spread (%) to 0.04 if BTCUSDT binance future, Spread (base) 0.0001 if trading EURUSD with 1 pip net spread).
Both lines indicate the relative volatility corrected cost of trading (ATR as orange line, StdDev as cyan).
Индикаторы ширины рынка
Bitfinex Spot PremiumOverview
A tool to display the spot price premium of Bitfinex coins vs the other big 3 exchanges.
Premium is calculated against:
- Coinbase
- Binance
- FTX
The average is calculated through volume weighting. The absolute difference between the Bitfinex spot price and the calculated average is then displayed on the histogram.
Interacting with the tool
Colours: Green bars indicate a positive premium (Bitfinex spot price is greater than the average), Red bars indicate a negative premium. The ability to grey out smaller premiums is also enabled with the "Grey Small Vals" checkbox, this can be used to further emphasise larger premiums.
Ticker: The ticker input allows you to detect the Bitfinex premium for any coin traded within all 4 exchanges (Bitfinex, Coinbase, Binance, FTX). Just input the coins ticker symbol, for example, "BTC", "ETH", "UNI".
Indicator Ideology
Bitfinex is known for being the home of crypto "smart money". Therefore, positive premiums indicate stronger buying from "smart money". Although this premium is a good sign of bullish/ bearish market conditions, for example, consecutive days of a negative Bitfinex premium have been pretty good at indicating short term tops in BTC, this indicator should only be used as a confirmation signal.
Tick Data DetailedHello All,
After Tick Chart and Tick Chart RSI scripts, this is Tick Data Detailed script. Like other tick scrips this one only works on real-time bars too. it creates two tables: the table at the right shows the detailed data for Current Bar and the table at the left shows the detailed data for all calculated bars (cumulative). the script checks the volume on each tick and add the tick and volume to the specified level (you can set/change levels)
The volume is multiplied by close price to calculate real volume .There are 7 levels/zones and the default levels are:
0 - 10.000
10.000 - 20.000
20.000 - 50.000
50.000 - 100.000
100.000 - 200.000
200.000 - 400.000
> 400.000
With this info, you will get number of ticks and total volumes on each levels. The idea to separate this levels is in order to know which type of traders trade at that moment. for example volume of whale moves are probably greater than 400.000 or at least 100.000. Or volume of small traders is less than 10.000 or between 20.000-50.000.
You will get info if there is anomaly on each candle as well. what is anomaly definition? Current candle is green but Sell volume is greater than Buy volume or current candle is red but Buy volume is greater than Sell volume . it is shown as (!). you should think/search why/how this anomaly occurs. You can see screenshot about it below.
also "TOTAL" text color changes automatically. if Buy volume is greater than Sell volume then its color becomes Green, if Sell volume is greater than Buy volume then its color becomes Red (or any color you set)
Optionally you can change background and text colors as shown in the example below.
Explanation:
How anomaly is shown:
You can enable coloring background and set the colors as you wish:
And Thanks to @Duyck for letting me use the special characters from his great script.
Enjoy!
CAT Shaky TopThe indicator shows when S&P goes overbought while breadth does not confirm the rally.
The standard conditions are:
- S&P goes over 200 day weighted moving average increased by 10% and
- % of US stocks over 50 DMA holds under 60.
When both conditions are met the indicator plots a red triangle on top of the price.
You can change two inputs to see how often in the past similar cases happened.
If you have any questions please send me email to castawaytrader@gmail.com
Annualized Futures Spread2つの銘柄間のスプレッドを年率換算してオシレーターの枠に表示するスクリプトです。
（BTCUSD現物とBTC-0625先物契約のような2銘柄間で使用することを想定しています。）
設定で年率換算していない生の乖離率の表示に切り替えることも可能です。
初期設定ではFTXの BTCUSDとBTCUSD-0624、BTCUSDとBTC-1231、ETHUSDとETH-0625 が指定されています。
そのまま使用しても構いませんし、設定やソースコードを編集して活用してくださって構いません。
ーーーーーーーーーーーーー
This custom script can be used to display the annualized spread rate between two specified symbols like BTCUSD and BTC-0625.
It is also possible to display raw spreads that are not annualized. (Just simply clicking the checkbox in setting.)
The default settings are BTC0625 and BTCUSD, BTC1231 and BTCUSD, and ETH0625 and ETHUSD on FTX Exchange.
You may use it as-is, or edit the settings or modify the source code as you like.
(This script was removed due to a violation of the English-Only house rule once, so this is a repost with a revised title and text.)
P/L CalculatorI couldn't find an existing indicator that simply calculated profit and loss, so here's one for quick, visual P/L. My api's lag too much to this helps while scalping.
Bond Yields (China)With reference to "Bond Yields eXtreme" by danarm
The bond yields from China are combined for easy reference
ComboTrade V.2.1 (BuySell Signals,Take profit,4MA,Fibo,Ichi+QL)A WORD WITH ESTEEMED TRADERS:
The type of indicator that a trader uses to create a strategy depends on the type of strategy he intends to employ; this is related to the trading style and the trader's loss tolerance.
A trader looking for a long-term trade with high profits may adopt a follow-up strategy, and on the other hand, a trader who decides to make short-term trades with frequent but low profits may be eager to use a strategy based on price fluctuations. Different types of indicators can be used to confirm the results.
Indicators alone should not be used as a tool to make trading decisions. Instead, every trader should use indicators to receive trading signals and formulate trading strategies and determine his or her exact method.
Brief and essential description:
With the above description, traders are advised to use the ComboTrade indicator as a trading assistant. Using the tools embedded in this trading assistant makes it easy for traders and depending on the trading strategy, you can get the best result for positioning.
Note 1: The trading time frame for ComboTrade with over one hour (1H) will achieve best result. Checking out the lower time frame to buy or sell as a confirmation is recommended.
Note 2: At Trading View home screen choose “ Candles or ...” as “Bar’s Style”.
Once you added ComboTrade into to your chart, go to the setting gear of the ComboTrade indicator, which includes two sections: “Input” and “Style”.
The “Input” section is for the input values of the indicators and the “Style” section is for activating and deactivating the tools.
Activate Moving Average 7, 21, 50 and 200 with close (Default)
Activate Combo Cloud by tick the “Show ichimoku” if you use it (Default)
By activating ichimoku, three components will be added to the Como Cloud with below details:
1- The “Quality Line” shows the quality line (26 Kijun-sen future candlesticks) which helps the trader to understand the direction of the trend and will help the trader to make a decision.
2. The “Period Line” shows the 103-day period and can act as a support and resistance tool. In addition, this number can be changed.
3- The intersection of various Como cloud lines has also been installed.
The TP (Take Profit) signal indicates a similar buy or sell area using the RSI and Stochastic oscillators, and be sure to pay special attention to it. Be sure to tick the related box (TP) at “Style” section.
The “Trailing Stop” at “Style” section acts as a support and resistance line. It acts as a support when the price candle is placed above the Trailing Stop line and as a resistance if the price candle is placed below the Trailing Stop line.
At “Bot Key Value” in “Input” section, the number is adjustable from 0.25 to any number. According to the trader's strategy, the number of input and output signals in this section can be adjusted. The best number for BTC is 0.78 and for Altcoins is 0.78 to 1.
At “Bot ATR Period” in “Input” section, the best default number is 8. The best values for Altcoins is 8 to 10, which has a significant effect on the regulation of signaling and support and authority lines.
The “Bot Buy” and “Bot Sell” at “Style” section are the main and most important parts of the indicator that you must tick in order to active them both.
“Plot Background” can activate the Como Cloud and set it to green (ascending) and red (descending).
The “Labels” and “Lines” are related to the important Fibonacci tool, which by displaying the lines of the Fibonacci lines and by activating the label, the numbers related to the price and the Fibonacci numbers are displayed. It helps traders to extract data from the last few days.
DISCLAIMER:
ALL DECISIONS AND RISK MANAGEMENT, ETC. ARE THE FULL RESPONSIBILITY OF THE TRADER AND THE AUTHOR IS NOT RESPONSIBLE FOR THE POSITIONS AND THE RESULTS OF THE TRADES (POSSIBLE LOSSES) IN ANY WAYS. DO YOUR OWN RESEARCH (DYOR) BEFORE ENTERING/ EXISTING IN TO/ FROM ANY POSITIONS.
Please like and use your comments after using the indicator.
Always be Profitable!
JebraTrade
14 April 2021
SB On Balance Profit/Loss IndicatorI was always interested in volume indicators as well as market sentiment.
While brainstorming, I came to the thought that people with gains vs people with losses can move a stock up or down.
I don't want to debate the rational behind people buying and selling based on profits or losses, so this isnt a signaling indicator.
However, I still wanted to have a way to measure and visualize this information.
On Balance Volume was not enough for me. I wanted to know how much actual money was made or lost, over time.
This indicator was created based on two different time periods, the daily and the 30m.
The daily time period is used to measure money made from close of the day before to the open of the current day (gap up/down).
The 30 minute precision period is used to measure the money made from the close of the current bar from the close of the bar prior and calculated 13 times per trading session.
There is an option for 15 minute and 5 minute precision, but it may take longer for the script to process and may time out at lower precision periods.
The default lookback period is 10 days, values are cumulative. We can clearly see over the last 10 days how much money was made, lost and on balance. This should affect trader sentiment.
Visual display is the cumulative money made (green line), cumulative money lost (red line), and cumulative net on balance money (black line). The net on balance money is filled green above zero and filled red below zero.
The Green Histogram is the money made overnight, the Red histogram is the money lost overnight.
The black histogram above zero is the money made intraday and the black histogram is the money lost intraday.
Takeways
Just because a stock is trending down, as noted by the downward slop in price on the daily chart , it does not mean that the average trader is losing money. Intraday price action can offset money lost at higher time periods.
Especially in cases where a stock gaps down overnight, buyers step in at the low and the stock closes above open, but below previous days close. Esspecially when this is done on high volume .
The net profit can be greater than net loss, even if the day closes down from previous close. This can really help with "sentiment" and being able to visualize this sentiment may be helpful in making a decision to buy or sell.
View my collection of custom scripts at: www.tradingview.com
Astro FX indicatorsThis is a suite of commonly used indicators from the Astro FX course. If you are already familiar with all how to use all of these tools it will be useful to have them all in one place. If you are not already familiar with these then there is way too much to cover here in a simple description!
Happy trading!
Saurabh's ORB 45This is indicator is all about opening range breakout on 45 mins charts.
|
|
|
|
|
which can be useful to day trader as a breakout strategy following the trend. Useful in 45 mins charts. Also, you may change the time frame from settings according to your likes.
Give thumbs up if you like it.
Bollinger Bands OBVBB OBV is a Volume-based indicator that shows the balance and performance of the market.
Spots Support and Resistance levels within a growth/decline cycle.
Can be used for different Time Frames.
Length can be changed to a bigger number to adjust it to the smaller TF.
Structure AnalyzerA momentum indicator that uses the highest and lowest values for price in three different lookback lengths to find the performance relative to three timeframes.
- The yellow line is the product of the price performance in three different timeframes.
- The red line is 200 EMA of the performance.
- The blue columns represent the same calculation or the volume(OBV based).
- The aqua line is the 200 EMA of the volume performance.
How to use: Whenever the performance crosses above the 200 EMA, the price is in an uptrend.
Important: When in a downtrend, the performance will stay below the 200 EMA for a long time; hence it is important o wait until the crossover.
Catalogador Binarias Padron MHI DejaVuTradesQuadrant patterns with 1 minute cataloging.
This script simulates the quadrants between candles from minute 1 to 5.
set your time frame to 1M.
Ready, now we have our quadrants and we will do the analysis of these patterns using them.
Green circles indicate winning trades, and blue circles Martingale steps.
Counting candles within the quadrants (time frame m1 )
MHI
There are several variants of MHI . In our cataloguer we offer 3 variants. MHI 1, 2 and 3.
The analysis is carried out from the last three candles in the last quadrant. And the entry is made: on the first candle of the current quadrant ( MHI 1), on the second candle of the current quadrant ( MHI 2) and on the third candle of the current quadrant ( MHI 3).
MHI 1
Entry into the first candle after the quadrant analysis. First martingale (in case of loss) in the second candle and second martingale (in case of two losses) in the third candle.
MHI 2
Entry into the second candle after the quadrant analysis. First martingale (in case of loss) on the third candle and second martingale (in case of two losses) on the fourth candle.
MHI 3
Entry into the third candle after the quadrant analysis. First martingale (in case of loss) on the fourth candle and second martingale (in case of two losses) on the fifth candle.
The million dollar pattern
It is an analysis very similar to that of the MHI , with the difference that it is in the entire quadrant.
The million analysis consists of looking at all the candles in the last quadrant and entering the first candle of the current quadrant saying that that first candle will be the same color as most of the last quadrant.
In cases where we have the same number of candles (3 red and 3 green) we do not trade! And the cataloger will not count these operations.
Three Neighbors Pattern
The analysis of the pattern of the three neighbors will always be in the third candle of the quadrant. Either in M5 or M1 . And it consists of observing the third candle and entering the following ones saying that it will be the same.
Pattern C3
The C3 pattern is also an analysis in the candlestick count. We will enter the first
quadrant candle saying that it will be equal to the first candle of the last quadrant.
In the case of 1 martingale we will enter the third candle saying that it will be equal to the third candle of the last quadrant.
And finally, in need of a second martingale, the entry will be in the fifth candle saying that it will be similar to the fifth of the last candle.
Moonwalker Pattern
The moonwalker pattern is also a quadrant pattern. Our entries will be in the first, second and third candles of the current quadrant.
The analysis is performed on the third, second and first candle of the last quadrant.
The entry of the first candle will be observed in the third candle of the last quadrant, being the opposite color to that observed. Being necessary a martingale, we make our entry into the second candle that claims the opposite color to the second candle in the last quadrant. Finally, our second martingale will be on the third candle of the current quadrant with analysis in which the color will be opposite to the first candle of the last quadrant.
The Bayesian Q OscillatorFirst of all the biggest thanks to @tista and @KivancOzbilgic for publishing their open source public indicators Bayesian BBSMA + nQQE Oscillator. And a mighty round of applause for @MarkBench for once again being my superhero pinescript guy that puts these awesome combination Ideas and ES stradegies in my head together. Now let me go ahead and explain what we have here.
I am gonna call it the Bayesian Q Oscillator I suppose. The goal of the script is to solve an issue both indicators on their own suffer from. QQE signals are not new and often the problem has always been false signals for them. They are good for scalping but the difference between a quality move and a small to nearly nonexistent move following a signal is not so clear. Kivanc made his normalized version to help reduce this problem by adding colors to his histogram type verision that would essentially represent if price was a trending move or in a ranging structure. As you can see I have kept this Idea but instead opted for lines as the oscillator. two yellow line (default color) is a ranging sideways area and when there is red or green it is trending up or down. I wanted to take this to the next level with combining the Bayesian probability oscillator that tista put together.
The Bayesian indicator is the opposite for its issue as it is a probability indicator that shows which candle or price movement is more likely to come next. Red rising means possibly down move soon and green means up soon. I will not go into the complex details of this indicator but will suggest others take a look at his and others to understand the idea behind them. The point I am driving at is that it show probabilities or likelyhood without the most effecient signal device to match it. This original was line form and now it is background filled colors.
The idea. is that you can potentially get some stronger and more accurate reversal signals with these two paired together. when you see a sell signal or cross with the towering or rising red... maybe it is a good jump potentially. The same for green. At the same time it is a double added filter effect from just having yellow represent it is ranging... but now if you get a buy signal (example) and have yellow lines (example) along wi5h a red rising or mountain color background... it not only is an indication of ranging, but also that there is potentially even a counter move coming based on the probabilities. Also if you get into a good trade and see dual yellow qqe crosses with no color represented by the bayesian background... it is possible it might only be noise.
I have found them to work decently in the 1 hour timframe. Let me know your experience.
I hope everyone takes a look at the originals to understand them. Full credit goes to those guys for this to be here. Let me know how it is working out for you.
Here are the original links.
bayesian
Normalized QQE
Previous Days High & LowRenders the high and low values from previous days.
Useful alert conditions are provided: "Less than low" and "Greater than high".
Configuration:
The number of days is configurable with a default of 1.
The source of the high and low values.
Use the close value instead of high and low values. Default is false.
The example above uses 2 days to demonstrate an exit strategy.
PRIME - R.o.c.M Ind. W/ TrendsThis experimental script is a variant of a model that allows a separate indicator window to be opened, revealing data for on balance volume, rsi, consumer commodity index and momentum indications. By use of the settings key, you can change the parameter of the source input as well as the desired lengths. After data compilation, the indicator will automatically draw any trend lines applicable to what is presented. The additional code is an attempt to allow the system to apply pivot points for alerts within the indicator itself.
Disclaimer:
Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely
The script is for informational and educational purposes only. Use of the script does not constitute professional and/or financial advice. You alone have the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold the publishing TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
FXBABATRADING ~ ZRANGE IndicatorOur ZRange indicator is an outstanding indicator to measure Volatility , that is, how much price has deviated from the mean. This indicator is part of a bundle of 5 indicators which we call the ZScore Indicator Suite all based on the ZScore function of statistics.
In this particular mode (ZRange) you can see whether the actual Standard Deviation is above or below the mean average of the Standard Deviation (period of your choice) determined by a + or - value. The value itself represents a Standard Deviation multiplier. A reading below ZERO simulates the Bollinger Band Squeeze, a time of price consolidation that is bound to break. Ideally you want to enter trades when the value of ZRange is increasing and above the signal line.
Alerts are provided for when volatility is increasing and or decreasing. Alerts can be turned off in settings.
Strategies where price is trending sideways will benefit when the ZRange is decreasing as it signifies price entering consolidation.
Each indicator in the ZScore Suite has a particular function:
ZClassic: Measures the position of Price in relation to a set average in units of standard deviation.
ZRange: Measures the position of the Standard Deviation itself in relation to a set average, in units of standard deviation.
ZVolumeDelta: Measures the position of Volume Delta in relation to a set average, in units of standard deviation.
ZTrend: Its a custom mathematical function that allows to measure the strength and direction of the Trend in reference to a set average.
Tradespot - S&R SuiteTradespot - S&R Suite
No configuration needed, works out the box
Dynamically created S&R lines & zones based on ongoing price action
Dynamically created fibonnaci retracement lines to create your trading range
Completely open to building a core trading strategy upon
Want to know more or have questions? Come join the Tradespot community, or send me a message on TradingView.
PDH/PDL ScreenerHello Fellow Traders,
This is a Real-Time Screener for stocks trading near previous day's high/low and day before previous day's high/low (default), you can select previous week also.
Screener scans stocks in batches of 10 on defined time-frame (preset- 5 min).
As of now total 100 stocks can be added out of which i've added 80 scripts i.e 8 batches to scan out.
Bits slower due to long code please give some seconds to load.
Happy Trading ...
"Dua me yaad rakhna :-)"
-Nitin
